{"id":3751119290420,"title":"Rockford 430-12 U-Joint \"Staked In\"","handle":"430-12","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-12\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e \u003c!-- ***** 1 ***** --\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"table\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGreasable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSnap Ring Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e430-12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e0.972 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLock Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e1.641 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eNissan,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePickup 2WD 4 cyl. \u003cmeta charset=\"utf-8\"\u003e(Rear)\u003cbr\u003e   - with 2 Staked-In Joint Shaft\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1990, 1991, 1992, 1993, 1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eNissan,\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePickup 2WD 4 cyl. \u003cmeta charset=\"utf-8\"\u003e(Rear)\u003cbr\u003e   - with 3\u003cspan\u003e \u003c\/span\u003eStaked-In Joint Shaft\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eNissan, \u003cem\u003ePickup 4x4 \u003c\/em\u003e \u003cem\u003e(Rear)\u003cbr\u003e   - Rear Shaft with 3 U-Joints - Middle Joint with Staked-In U-Joint\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan, \u003cem\u003e300ZX (Exc. Twin Turbo)\u003cbr\u003e   - With Staked-In U-Joints\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003eNissan, \u003c\/span\u003e\u003cem\u003e300ZX (Twin Turbo)\u003cbr\u003e   - With Staked-In Type Joints\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1987, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePathfinder 4x4 (Rear)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e   - Rear Shaft - Middle Joint with Staked-In U-Joint\u003cbr\u003e\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994, 1995\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eCressida\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e   - With Staked-In Type Joints\u003cbr\u003e\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1989, 1990, \u003cspan\u003e1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-12T10:07:36-04:00","created_at":"2019-07-12T10:07:36-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["43012","Brand_Rockford","Cap Size_0.97\"","CapSizeBullet_0.972\"","Grease_Greasable","LockUpBullet_1.641\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.64\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_Nissan","Vehicle_Toyota"],"price":2891,"price_min":2891,"price_max":2891,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28973265584180,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-12","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rockford 430-12 U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":2891,"weight":748,"compare_at_price":null,"inventory_quantity":-513,"inventory_management":null,"inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.34.jpg?v=1562941175","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.jpg?v=1562941179"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.34.jpg?v=1562941175","options":["Title"],"media":[{"alt":null,"id":3027607584903,"position":1,"preview_image":{"aspect_ratio":1.001,"height":1499,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.34.jpg?v=1562941175"},"aspect_ratio":1.001,"height":1499,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.34.jpg?v=1562941175","width":1500},{"alt":null,"id":3027607683207,"position":2,"preview_image":{"aspect_ratio":1.258,"height":1192,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.jpg?v=1562941179"},"aspect_ratio":1.258,"height":1192,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.jpg?v=1562941179","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-12\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e \u003c!-- ***** 1 ***** --\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"table\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGreasable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSnap Ring Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e430-12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e0.972 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLock Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e1.641 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eNissan,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePickup 2WD 4 cyl. \u003cmeta charset=\"utf-8\"\u003e(Rear)\u003cbr\u003e   - with 2 Staked-In Joint Shaft\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1990, 1991, 1992, 1993, 1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eNissan,\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePickup 2WD 4 cyl. \u003cmeta charset=\"utf-8\"\u003e(Rear)\u003cbr\u003e   - with 3\u003cspan\u003e \u003c\/span\u003eStaked-In Joint Shaft\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eNissan, \u003cem\u003ePickup 4x4 \u003c\/em\u003e \u003cem\u003e(Rear)\u003cbr\u003e   - Rear Shaft with 3 U-Joints - Middle Joint with Staked-In U-Joint\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan, \u003cem\u003e300ZX (Exc. Twin Turbo)\u003cbr\u003e   - With Staked-In U-Joints\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003eNissan, \u003c\/span\u003e\u003cem\u003e300ZX (Twin Turbo)\u003cbr\u003e   - With Staked-In Type Joints\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1987, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePathfinder 4x4 (Rear)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e   - Rear Shaft - Middle Joint with Staked-In U-Joint\u003cbr\u003e\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994, 1995\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eCressida\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e   - With Staked-In Type Joints\u003cbr\u003e\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1989, 1990, \u003cspan\u003e1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":8019223429,"title":"PTI 2603-30 Trans Slip Yoke","handle":"2603-30","description":"\u003ch2\u003ePTI Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli class=\"current\" data-tab=\"tab-1\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"tab-1\" class=\"shopify-tab-content current\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp;\u003cspan\u003e \u003c\/span\u003eTransfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFits various Chrysler, Dodge and Ram transmission with 30 spline output shafts including 45RFE, 46RH, 47RE, 47RH, 48RE, 48DG8, 545RFE, 545DGQ, 65RFE, A500, A518, A727, A833\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand more. \u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.078 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eDistance Between Machined Flats (B):\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2.125 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of Barrel)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e8.031 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.681 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.312 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 \u003cem\u003e(29 with blind spot - see note below*)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Counter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCounter Bore Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.507 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCounter Bore Depth:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.455 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriveshaft Category:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 7260 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_7260+spline-count_30\"\u003e Ea\u003c\/a\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 1310 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_1310+spline-count_30\"\u003e\u003c\/a\u003e, \u003ca title=\"Custom Driveshafts with Slip Yoke 7260 + 30 + Eb\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/u-joint-series_7260+spline-count_30+trans-category_eb\"\u003eEb\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at10.16.47AM_480x480.png?v=1685111046\" alt=\"Slip Yoke Inside Snap Ring Diagram\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-2\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cem\u003ePowertrain\u003c\/em\u003e\u003cspan\u003e focuses on driveshaft parts for many of the popular foreign rear wheel drive cars and light trucks on the road today.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-3\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cspan\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_Side_480x480.png?v=1599244169\" alt=\"Inside Snap Ring\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_End_480x480.png?v=1599244232\" alt=\"Inside Snap Ring Slip Yoke\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Part Numbers:\u003c\/strong\u003e \u003cbr\u003eSpicer \u003ca title=\"Spicer 5-789X U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/products\/5-789x?variant=30462690693\"\u003e5-789X\u003c\/a\u003e U-Joint\u003c\/p\u003e","published_at":"2017-09-19T12:48:31-04:00","created_at":"2017-05-30T08:15:59-04:00","vendor":"PTI","type":"Slip Yoke","tags":["1.312","260330","2883575","29","30","45RFE","46RE","46RH","47RE","47RH","48RE","545RFE","65RFE","727","A518","A833","Application_Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions including","Barrel OD_1.68\"","Bearing Cap Diameter_1.078\"","Brand_PTI","Length_8.03\"","Lock Up_2.125\"","Part_Transmission Slip Yoke","Part_Yoke","Series_7260","Spline Diameter_1.31\"","Spline_30","TorqueFlite 727","Trans. Category_Ea","Transmission Make_Chrysler","Transmission Make_Dodge","Transmission Model_45RFE","Transmission Model_46RE","Transmission Model_46RH","Transmission Model_47RE","Transmission Model_47RH","Transmission Model_48RE","Transmission Model_545RFE","Transmission Model_65RFE","Transmission Model_727","Transmission Model_A500","Transmission Model_A518","Transmission Model_A833","Transmission Model_TorqueFlite 727","Transmission Slip Assembly","U-Joint Type_Inside Snap Ring","Vehicle_Dodge","Yoke_Transmission Slip Yoke"],"price":6050,"price_min":6050,"price_max":6050,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30462696325,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2603-30","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PTI 2603-30 Trans Slip Yoke","public_title":null,"options":["Default Title"],"price":6050,"weight":1429,"compare_at_price":null,"inventory_quantity":-226,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154660.6254.-PTIWM.jpg?v=1633375437","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154659.6477.-PTIWM.jpg?v=1589397262","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154670.6814.-PTIWM.jpg?v=1589397262","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30_Slip_Yoke.jpg?v=1589397262"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154660.6254.-PTIWM.jpg?v=1633375437","options":["Title"],"media":[{"alt":null,"id":8889092243591,"position":1,"preview_image":{"aspect_ratio":0.426,"height":500,"width":213,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154660.6254.-PTIWM.jpg?v=1633375437"},"aspect_ratio":0.426,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154660.6254.-PTIWM.jpg?v=1633375437","width":213},{"alt":null,"id":8889092178055,"position":2,"preview_image":{"aspect_ratio":0.488,"height":500,"width":244,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154659.6477.-PTIWM.jpg?v=1589397262"},"aspect_ratio":0.488,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154659.6477.-PTIWM.jpg?v=1589397262","width":244},{"alt":null,"id":8889092210823,"position":3,"preview_image":{"aspect_ratio":1.131,"height":442,"width":500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154670.6814.-PTIWM.jpg?v=1589397262"},"aspect_ratio":1.131,"height":442,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30.1437154670.6814.-PTIWM.jpg?v=1589397262","width":500},{"alt":null,"id":2374979813511,"position":4,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30_Slip_Yoke.jpg?v=1589397262"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-30_Slip_Yoke.jpg?v=1589397262","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003ePTI Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli class=\"current\" data-tab=\"tab-1\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"tab-1\" class=\"shopify-tab-content current\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp;\u003cspan\u003e \u003c\/span\u003eTransfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFits various Chrysler, Dodge and Ram transmission with 30 spline output shafts including 45RFE, 46RH, 47RE, 47RH, 48RE, 48DG8, 545RFE, 545DGQ, 65RFE, A500, A518, A727, A833\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eand more. \u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.078 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eDistance Between Machined Flats (B):\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2.125 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of Barrel)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e8.031 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.681 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.312 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 \u003cem\u003e(29 with blind spot - see note below*)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Counter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCounter Bore Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.507 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCounter Bore Depth:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.455 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriveshaft Category:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 7260 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_7260+spline-count_30\"\u003e Ea\u003c\/a\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 1310 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_1310+spline-count_30\"\u003e\u003c\/a\u003e, \u003ca title=\"Custom Driveshafts with Slip Yoke 7260 + 30 + Eb\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/u-joint-series_7260+spline-count_30+trans-category_eb\"\u003eEb\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at10.16.47AM_480x480.png?v=1685111046\" alt=\"Slip Yoke Inside Snap Ring Diagram\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-2\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cem\u003ePowertrain\u003c\/em\u003e\u003cspan\u003e focuses on driveshaft parts for many of the popular foreign rear wheel drive cars and light trucks on the road today.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-3\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cspan\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_Side_480x480.png?v=1599244169\" alt=\"Inside Snap Ring\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_End_480x480.png?v=1599244232\" alt=\"Inside Snap Ring Slip Yoke\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Part Numbers:\u003c\/strong\u003e \u003cbr\u003eSpicer \u003ca title=\"Spicer 5-789X U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/products\/5-789x?variant=30462690693\"\u003e5-789X\u003c\/a\u003e U-Joint\u003c\/p\u003e"}

{"id":7689817817315,"title":"AMI M8-1.25 X 35MM Bolt Kit (Qty. 4)","handle":"ami_m8-1-25-x-35mm-bolts","description":"\u003ch1\u003e\u003cstrong\u003eDriveshaft Bolt Kit\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM8-1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHead Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM8-1.25X35MM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 053-007-005\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Fitment\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRam 2500\/3500 Serrated front flange bolts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eCompatible\u003c\/b\u003e\u003cstrong\u003e Parts: \u003cbr\u003e\u003c\/strong\u003eAAM \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/40019801?variant=41542115141\" title=\"AAM 40019801 Flange Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/40019801?variant=41542115141\"\u003e40019801\u003c\/a\u003e Flange Yoke\u003cbr\u003eAAM \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/40038359?variant=41543637957\" title=\"AAM 40038359 Flange Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/40038359?variant=41543637957\"\u003e40038359\u003c\/a\u003e Flange Yoke\u003cbr\u003ePTI 3R02-291 \u003cspan data-mce-fragment=\"1\"\u003eFlange Yoke\u003c\/span\u003e\u003cbr\u003ePTI \u003ca title=\"PTI 3502-291 Flange Yoke\" href=\"https:\/\/www.actionmachineinc.com\/products\/3502-291?variant=34741045362839\"\u003e3502-291\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eFlange Yoke\u003cbr\u003eAMI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/7-16-14_bolt?variant=44405373272291\" title='AMI 7\/16\"-14 X 1-1\/4\" Bolt Kit (Qty. 4)' data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/7-16-14_bolt?variant=44405373272291\"\u003e7\/16\"-14 X 1-1\/4\"\u003c\/a\u003e Bolt Kit (Qty. 4) - 03-18 Dodge RAM 2500\/3500 4X4\u003cbr\u003eAMI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/ami_68055243?variant=33282872606855\" title=\"AMI 68055243 Bolt Kit (Qty. 4)\"\u003e68055243\u003c\/a\u003e Bolt Kit (Qty. 4) - 03-18 Dodge RAM 2500\/3500 4X4\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompatible\u003c\/b\u003e\u003cstrong\u003e with the RAM 2500\/3500 4X4 from 2003 – 2018 front shaft to front differential.\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2022-05-18T11:18:19-04:00","created_at":"2022-05-18T11:18:19-04:00","vendor":"Action Machine Inc.","type":"Hardware","tags":["Brand_Action Machine Inc.","Bullet L1_Length: 35mm","Bullet L2_Thread: M8-1.25","Bullet L3_Type: 12-Point","Bullet R1_Qty: 4","Bullet R2_Material: Steel","Bullet R3_Brand: AMI","Hardware_Bolts","Part_Hardware","Vehicle_Dodge"],"price":1015,"price_min":1015,"price_max":1015,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42880737902819,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AMI M8-1.25X35MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AMI M8-1.25 X 35MM Bolt Kit (Qty. 4)","public_title":null,"options":["Default Title"],"price":1015,"weight":136,"compare_at_price":null,"inventory_quantity":-288,"inventory_management":null,"inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolts.1.jpg?v=1652898178","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolt.3.jpg?v=1652898182","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolt.2.jpg?v=1652898193"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolts.1.jpg?v=1652898178","options":["Title"],"media":[{"alt":null,"id":29964556370147,"position":1,"preview_image":{"aspect_ratio":1.167,"height":1285,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolts.1.jpg?v=1652898178"},"aspect_ratio":1.167,"height":1285,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolts.1.jpg?v=1652898178","width":1500},{"alt":null,"id":29964556632291,"position":2,"preview_image":{"aspect_ratio":1.942,"height":1958,"width":3802,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolt.3.jpg?v=1652898182"},"aspect_ratio":1.942,"height":1958,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolt.3.jpg?v=1652898182","width":3802},{"alt":null,"id":29964556763363,"position":3,"preview_image":{"aspect_ratio":1.652,"height":908,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolt.2.jpg?v=1652898193"},"aspect_ratio":1.652,"height":908,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/Bolt.2.jpg?v=1652898193","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e\u003cstrong\u003eDriveshaft Bolt Kit\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM8-1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHead Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM8-1.25X35MM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 053-007-005\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Fitment\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRam 2500\/3500 Serrated front flange bolts.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cb\u003eCompatible\u003c\/b\u003e\u003cstrong\u003e Parts: \u003cbr\u003e\u003c\/strong\u003eAAM \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/40019801?variant=41542115141\" title=\"AAM 40019801 Flange Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/40019801?variant=41542115141\"\u003e40019801\u003c\/a\u003e Flange Yoke\u003cbr\u003eAAM \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/40038359?variant=41543637957\" title=\"AAM 40038359 Flange Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/40038359?variant=41543637957\"\u003e40038359\u003c\/a\u003e Flange Yoke\u003cbr\u003ePTI 3R02-291 \u003cspan data-mce-fragment=\"1\"\u003eFlange Yoke\u003c\/span\u003e\u003cbr\u003ePTI \u003ca title=\"PTI 3502-291 Flange Yoke\" href=\"https:\/\/www.actionmachineinc.com\/products\/3502-291?variant=34741045362839\"\u003e3502-291\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eFlange Yoke\u003cbr\u003eAMI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/7-16-14_bolt?variant=44405373272291\" title='AMI 7\/16\"-14 X 1-1\/4\" Bolt Kit (Qty. 4)' data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/7-16-14_bolt?variant=44405373272291\"\u003e7\/16\"-14 X 1-1\/4\"\u003c\/a\u003e Bolt Kit (Qty. 4) - 03-18 Dodge RAM 2500\/3500 4X4\u003cbr\u003eAMI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/ami_68055243?variant=33282872606855\" title=\"AMI 68055243 Bolt Kit (Qty. 4)\"\u003e68055243\u003c\/a\u003e Bolt Kit (Qty. 4) - 03-18 Dodge RAM 2500\/3500 4X4\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompatible\u003c\/b\u003e\u003cstrong\u003e with the RAM 2500\/3500 4X4 from 2003 – 2018 front shaft to front differential.\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":8019228357,"title":"Spicer 2-86-418 Double Cardan CV Ball Seal","handle":"2-86-418","description":"\u003ch1\u003eDriveshaft Universal Joint Dust Cap Seal\u003c\/h1\u003e\n\u003cp\u003eSteel \u0026amp; Rubber seal for CV Ball assemblies.\u003c\/p\u003e\n\u003cp\u003eUsed on Non Greasable Double Cardan 1310, 1330 \u0026amp; 1350 Joints\u003c\/p\u003e\n\u003cp\u003eThis is a genuine Spicer built driveshaft component. Spicer parts provide the enhanced performance and extended durability that you expect from the leader in the drivetrain industry.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eMaterial:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eRubber And Steel\u003cbr\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan\u003eOutside Diameter:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.83 Inch (46.48 mm)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan\u003eThickness:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.755 Inch (19.175 mm)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eSeal is used on double carden joint.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002012\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eThis part can be use with:\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003ca title=\"Spicer 404-0A CV Center Repair Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/404-0a?variant=30462701189\"\u003e\u003cstrong\u003eSKU 404-0A\u003c\/strong\u003e: CV Center Repair Kit | Rockford\u003c\/a\u003e\u003ca title=\"401-1\" href=\"https:\/\/www.actionmachineinc.com\/products\/401-1?variant=30462703045\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca title=\"Spicer 211544X CV Socket Yoke Assembly\" href=\"https:\/\/www.actionmachineinc.com\/products\/211544x?variant=30462704453\"\u003e\u003cstrong\u003eSKU 211544X\u003c\/strong\u003e: CV Socket Yoke Assembly | Spicer\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e\u003cbr\u003eNeapco \u003ca title=\"Neapco N2-86-418 Double Cardan CV Ball Seal\" href=\"https:\/\/www.actionmachineinc.com\/products\/n2-86-418?variant=44726456325\"\u003eN2-86-418\u003c\/a\u003e Double Cardan CV Ball Seal (In Stock)\u003c\/p\u003e","published_at":"2017-05-30T08:16:27-04:00","created_at":"2017-05-30T08:16:27-04:00","vendor":"Spicer\/Dana","type":"CV Joint","tags":["021-001-030","083869020334","20090910","286418","Brand_Spicer","CV Part_Hardware","Hardware_Seal","Part_Hardware"],"price":830,"price_min":830,"price_max":830,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30462708165,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2-86-418","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spicer 2-86-418 Double Cardan CV Ball Seal","public_title":null,"options":["Default Title"],"price":830,"weight":113,"compare_at_price":null,"inventory_quantity":-361,"inventory_management":null,"inventory_policy":"deny","barcode":"023913239374","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-86-418_CV_Seal.jpg?v=1496757674","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-86-418_CV_Seal.b.jpg?v=1496757674"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-86-418_CV_Seal.jpg?v=1496757674","options":["Title"],"media":[{"alt":null,"id":2375171702919,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-86-418_CV_Seal.jpg?v=1496757674"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-86-418_CV_Seal.jpg?v=1496757674","width":1500},{"alt":null,"id":2375171670151,"position":2,"preview_image":{"aspect_ratio":1.504,"height":236,"width":355,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-86-418_CV_Seal.b.jpg?v=1496757674"},"aspect_ratio":1.504,"height":236,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-86-418_CV_Seal.b.jpg?v=1496757674","width":355}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eDriveshaft Universal Joint Dust Cap Seal\u003c\/h1\u003e\n\u003cp\u003eSteel \u0026amp; Rubber seal for CV Ball assemblies.\u003c\/p\u003e\n\u003cp\u003eUsed on Non Greasable Double Cardan 1310, 1330 \u0026amp; 1350 Joints\u003c\/p\u003e\n\u003cp\u003eThis is a genuine Spicer built driveshaft component. Spicer parts provide the enhanced performance and extended durability that you expect from the leader in the drivetrain industry.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eMaterial:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eRubber And Steel\u003cbr\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan\u003eOutside Diameter:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.83 Inch (46.48 mm)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan\u003eThickness:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.755 Inch (19.175 mm)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eSeal is used on double carden joint.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002012\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eThis part can be use with:\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003ca title=\"Spicer 404-0A CV Center Repair Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/404-0a?variant=30462701189\"\u003e\u003cstrong\u003eSKU 404-0A\u003c\/strong\u003e: CV Center Repair Kit | Rockford\u003c\/a\u003e\u003ca title=\"401-1\" href=\"https:\/\/www.actionmachineinc.com\/products\/401-1?variant=30462703045\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca title=\"Spicer 211544X CV Socket Yoke Assembly\" href=\"https:\/\/www.actionmachineinc.com\/products\/211544x?variant=30462704453\"\u003e\u003cstrong\u003eSKU 211544X\u003c\/strong\u003e: CV Socket Yoke Assembly | Spicer\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e\u003cbr\u003eNeapco \u003ca title=\"Neapco N2-86-418 Double Cardan CV Ball Seal\" href=\"https:\/\/www.actionmachineinc.com\/products\/n2-86-418?variant=44726456325\"\u003eN2-86-418\u003c\/a\u003e Double Cardan CV Ball Seal (In Stock)\u003c\/p\u003e"}

{"id":8933087813,"title":"Neapco N2-3-10431X Trans Slip Yoke","handle":"n2-3-10431x","description":"\u003ch2\u003eNeapco Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003cp\u003eNeapco N2-3-10431X transmission yoke has an ideal barrel length for OEM replacement, restorations, or performance shafts.  Longer yokes than N2-3-10431X may fit as well but check your application to verify. This yoke is not a suitable barrel length for transfer cases.  This yoke has splines that are counterbored (removed) .850\" from end of yoke.\u003c\/p\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli class=\"current\" data-tab=\"tab-1\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"tab-1\" class=\"shopify-tab-content current\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp;\u003cspan\u003e \u003c\/span\u003eTransfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E  and confirm dimensions for transfer cases fitment\u003c\/span\u003e\u003cspan\u003e.  \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOutside Snap Ring\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint  Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.063 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Width (B):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.219 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of \u003cmeta charset=\"utf-8\"\u003eBarrel)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e5.5 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Barrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.885 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.391 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 \u003cem\u003e(31 with blind spot - see note below*)\u003c\/em\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCounter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eYes \u003cbr\u003e0.850 Inch from end of yoke\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Joint Angle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15.0 Degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Vehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriveshaft Category:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_pshort+u-joint-series_1310\" title=\"Custom Driveshafts with Slip Yoke P(Short) + 1310\"\u003eP(Short)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Driveshaft Slip Yoke Diagram Outside Snap Ring Style\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at3.07.11PM_480x480.png?v=1685128181\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission Output Shaft Style\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eIf you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a \u003c\/span\u003e\u003cspan\u003e5.5” short barrel\u003c\/span\u003e\u003cspan\u003e counter\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ebored\u003c\/span\u003e\u003cspan\u003e slip yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Transmission_Slip_yoke_counterbore_480x480.png?v=1613663588\" alt=\"Transmission Slip yoke with and without counter bore\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-2\" class=\"shopify-tab-content\"\u003eNeapco Drive Shaft Transmission Slip Yoke\u003c\/div\u003e\n\u003cdiv id=\"tab-3\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2020-01-31_at_8.22.40_AM_480x480.png?v=1580478334\" alt=\"outside snap ring slip yoke\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/AMI_Slip_Yoke_diagram.b_480x480.png?v=1580313458\" alt=\"Slip Yoke\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\u003cp\u003e\u003cstrong\u003eThis part is compatible with: \u003cbr\u003e\u003c\/strong\u003eSpicer \u003ca title=\"Spicer 5-153X U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/products\/5-153x?variant=38130350789\"\u003e5-153X\u003c\/a\u003e Universal Joint\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Option:\u003c\/strong\u003e\u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/3-3-2431x?variant=33096307909\" title=\"Spicer 3-3-2431X Trans Slip Yoke\"\u003e2-3-10431X\u003c\/a\u003e Slip Yoke without Counter Bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions we are here to help: \u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003eCHAT\u003c\/a\u003e | \u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" title=\"Contact Information for Action Machine Inc.\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e | (574)287-9650\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-05-30T08:16:02-04:00","created_at":"2017-08-28T09:47:43-04:00","vendor":"Neapco","type":"Slip Yoke","tags":["2-3-10431X","2-3-5981x","4L80","4L80E","4L85","Application_Transmission Applications: Fits various 32 spline transmission. Fits Transmission Models","Barrel OD_1.89\"","Bearing Cap Diameter_1.063\"","Brand_Neapco","Doug Nash","Jericho","Length_5.50\"","Lock Up_3.219\"","M-20","M20","M21","M22","N2310431X","Part_Transmission Slip Yoke","Part_Yoke","Richmond","Series_1310","Spline Diameter_1.38\"","Spline_32","Super T-10","Super T10","T-10","T10","TH-400","TH400","Trans. Category_P(Short)","Transmission Make_GM","Transmission Model_4L80E","Transmission Model_4L85E","Transmission Model_Doug Nash","Transmission Model_Jericho","Transmission Model_M20","Transmission Model_M21","Transmission Model_M22","Transmission Model_Richmond","Transmission Model_Super T-10","Transmission Model_T-10","Transmission Model_TH-400","Transmission Model_Turbo 400","Transmission Slip Assembly","Turbo 400","U-Joint Type_Outside Snap Ring","Vehicle_GM","Yoke_Transmission Slip Yoke"],"price":11915,"price_min":11915,"price_max":11915,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41369329285,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N2-3-10431X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco N2-3-10431X Trans Slip Yoke","public_title":null,"options":["Default Title"],"price":11915,"weight":1497,"compare_at_price":null,"inventory_quantity":-95,"inventory_management":null,"inventory_policy":"deny","barcode":"083869017358","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/ScreenShot2023-02-13at2.14.15PM.png?v=1676315787"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/ScreenShot2023-02-13at2.14.15PM.png?v=1676315787","options":["Title"],"media":[{"alt":null,"id":31791431155939,"position":1,"preview_image":{"aspect_ratio":0.882,"height":2330,"width":2056,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/ScreenShot2023-02-13at2.14.15PM.png?v=1676315787"},"aspect_ratio":0.882,"height":2330,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/ScreenShot2023-02-13at2.14.15PM.png?v=1676315787","width":2056}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eNeapco Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003cp\u003eNeapco N2-3-10431X transmission yoke has an ideal barrel length for OEM replacement, restorations, or performance shafts.  Longer yokes than N2-3-10431X may fit as well but check your application to verify. This yoke is not a suitable barrel length for transfer cases.  This yoke has splines that are counterbored (removed) .850\" from end of yoke.\u003c\/p\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli class=\"current\" data-tab=\"tab-1\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"tab-1\" class=\"shopify-tab-content current\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp;\u003cspan\u003e \u003c\/span\u003eTransfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E  and confirm dimensions for transfer cases fitment\u003c\/span\u003e\u003cspan\u003e.  \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOutside Snap Ring\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint  Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.063 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Width (B):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.219 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of \u003cmeta charset=\"utf-8\"\u003eBarrel)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e5.5 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Barrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.885 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.391 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 \u003cem\u003e(31 with blind spot - see note below*)\u003c\/em\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCounter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eYes \u003cbr\u003e0.850 Inch from end of yoke\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Joint Angle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15.0 Degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Vehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriveshaft Category:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_pshort+u-joint-series_1310\" title=\"Custom Driveshafts with Slip Yoke P(Short) + 1310\"\u003eP(Short)\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Driveshaft Slip Yoke Diagram Outside Snap Ring Style\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at3.07.11PM_480x480.png?v=1685128181\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission Output Shaft Style\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eIf you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a \u003c\/span\u003e\u003cspan\u003e5.5” short barrel\u003c\/span\u003e\u003cspan\u003e counter\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ebored\u003c\/span\u003e\u003cspan\u003e slip yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Transmission_Slip_yoke_counterbore_480x480.png?v=1613663588\" alt=\"Transmission Slip yoke with and without counter bore\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-2\" class=\"shopify-tab-content\"\u003eNeapco Drive Shaft Transmission Slip Yoke\u003c\/div\u003e\n\u003cdiv id=\"tab-3\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2020-01-31_at_8.22.40_AM_480x480.png?v=1580478334\" alt=\"outside snap ring slip yoke\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/AMI_Slip_Yoke_diagram.b_480x480.png?v=1580313458\" alt=\"Slip Yoke\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\u003cp\u003e\u003cstrong\u003eThis part is compatible with: \u003cbr\u003e\u003c\/strong\u003eSpicer \u003ca title=\"Spicer 5-153X U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/products\/5-153x?variant=38130350789\"\u003e5-153X\u003c\/a\u003e Universal Joint\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Option:\u003c\/strong\u003e\u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/3-3-2431x?variant=33096307909\" title=\"Spicer 3-3-2431X Trans Slip Yoke\"\u003e2-3-10431X\u003c\/a\u003e Slip Yoke without Counter Bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions we are here to help: \u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003eCHAT\u003c\/a\u003e | \u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" title=\"Contact Information for Action Machine Inc.\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e | (574)287-9650\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":9020500293,"title":"PTI 2603-26 Trans Slip Yoke","handle":"2603-26","description":"\u003ch2\u003ePTI Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli data-tab=\"tab-1\" class=\"current\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"shopify-tab-content current\" id=\"tab-1\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp;\u003cspan\u003e \u003c\/span\u003eTransfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFits various Chrysler, Dodge, and GM Vehicles with 26 spline output shafts including the: 904 \u0026amp; AX15.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.078 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eDistance Between Machined Flats (B):\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2.125 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of \u003cmeta charset=\"utf-8\"\u003eBarrel)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 255px;\"\u003e6.875 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.559 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.156 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26 \u003cem\u003e(25 with blind spot - see note below*)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Counter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOEM Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2852323 (Detroit)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriveshaft Category:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke A + 26 + 7260\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_a+spline-count_26+u-joint-series_7260\"\u003e\u003cspan\u003e A\u003c\/span\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Transmission Slip Yoke Diagram Inside Snap Ring Style\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at10.16.47AM_7106c564-6ca4-4d69-9f20-f498f7a1fd3d_600x600.png?v=1685111601\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Alternate Slip Yoke Options:\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDana offers two 1310 yokes the \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/2-3-8731x?variant=33095548037\" title=\"Spicer 2-3-8731X Trans Slip Yoke\" target=\"_blank\"\u003e2-3-8731x\u003c\/a\u003e and the 2-3-11731x. Both of these yokes are approximately .87\" shorter than the 2603-26.\u003c\/p\u003e\n\u003cp\u003eDana also offers the \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/2-3-14311x?variant=42557433413\" title=\"Spicer 2-3-14311X Trans Slip Yoke\"\u003e2-3-14311x\u003c\/a\u003e which is 1330 series this yoke is slightly longer (.12\") then the 2603-26.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-2\"\u003e\n\u003cp\u003ePower Train Inc - Driveshaft Trans Slip Yoke\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-3\"\u003e\n\u003cp\u003e\u003cspan\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_Side_480x480.png?v=1599244169\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_End_480x480.png?v=1599244232\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e","published_at":"2017-09-19T12:48:36-04:00","created_at":"2017-09-12T14:46:51-04:00","vendor":"PTI","type":"Slip Yoke","tags":["260326","2852323","904","Application_Transmission Applications: Fits various 26 spline transmission output shafts for early Dodge cars as well as GM and Dodge trucks. Fits Transmission Models","AX15","Barrel OD_1.56\"","Bearing Cap Diameter_1.078\"","Brand_PTI","Length_6.87\"","Lock Up_2.125\"","Part_Transmission Slip Yoke","Part_Yoke","Series_7260","Spline Diameter_1.16\"","Spline_26","Trans. Category_A","Transmission Make_Chrysler","Transmission Make_Dodge","Transmission Model_904","Transmission Model_AX15","Transmission Slip Assembly","U-Joint Type_Inside Snap Ring","Vehicle_Dodge","Vehicle_Mitsubishi","Yoke_Transmission Slip Yoke"],"price":6188,"price_min":6188,"price_max":6188,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42556701701,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2603-26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PTI 2603-26 Trans Slip Yoke","public_title":null,"options":["Default Title"],"price":6188,"weight":1315,"compare_at_price":null,"inventory_quantity":-129,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.jpg?v=1618409325","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768025.4579.-PTIWM.jpg?v=1618409325","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768032.5446.-PTIWM.jpg?v=1618409340","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768027.7585.-PTIWM.jpg?v=1618409340"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.jpg?v=1618409325","options":["Title"],"media":[{"alt":null,"id":21746807341207,"position":1,"preview_image":{"aspect_ratio":0.462,"height":500,"width":231,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.jpg?v=1618409325"},"aspect_ratio":0.462,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.jpg?v=1618409325","width":231},{"alt":null,"id":2402529411207,"position":2,"preview_image":{"aspect_ratio":0.462,"height":500,"width":231,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768025.4579.-PTIWM.jpg?v=1618409325"},"aspect_ratio":0.462,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768025.4579.-PTIWM.jpg?v=1618409325","width":231},{"alt":null,"id":21746818121879,"position":3,"preview_image":{"aspect_ratio":2.717,"height":184,"width":500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768032.5446.-PTIWM.jpg?v=1618409340"},"aspect_ratio":2.717,"height":184,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768032.5446.-PTIWM.jpg?v=1618409340","width":500},{"alt":null,"id":21746818187415,"position":4,"preview_image":{"aspect_ratio":0.54,"height":500,"width":270,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768027.7585.-PTIWM.jpg?v=1618409340"},"aspect_ratio":0.54,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2603-26.1423768027.7585.-PTIWM.jpg?v=1618409340","width":270}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003ePTI Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli data-tab=\"tab-1\" class=\"current\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"shopify-tab-content current\" id=\"tab-1\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp;\u003cspan\u003e \u003c\/span\u003eTransfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFits various Chrysler, Dodge, and GM Vehicles with 26 spline output shafts including the: 904 \u0026amp; AX15.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.078 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eDistance Between Machined Flats (B):\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2.125 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of \u003cmeta charset=\"utf-8\"\u003eBarrel)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 255px;\"\u003e6.875 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.559 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.156 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26 \u003cem\u003e(25 with blind spot - see note below*)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Counter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOEM Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2852323 (Detroit)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriveshaft Category:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke A + 26 + 7260\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_a+spline-count_26+u-joint-series_7260\"\u003e\u003cspan\u003e A\u003c\/span\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Transmission Slip Yoke Diagram Inside Snap Ring Style\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at10.16.47AM_7106c564-6ca4-4d69-9f20-f498f7a1fd3d_600x600.png?v=1685111601\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Alternate Slip Yoke Options:\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDana offers two 1310 yokes the \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/2-3-8731x?variant=33095548037\" title=\"Spicer 2-3-8731X Trans Slip Yoke\" target=\"_blank\"\u003e2-3-8731x\u003c\/a\u003e and the 2-3-11731x. Both of these yokes are approximately .87\" shorter than the 2603-26.\u003c\/p\u003e\n\u003cp\u003eDana also offers the \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/2-3-14311x?variant=42557433413\" title=\"Spicer 2-3-14311X Trans Slip Yoke\"\u003e2-3-14311x\u003c\/a\u003e which is 1330 series this yoke is slightly longer (.12\") then the 2603-26.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-2\"\u003e\n\u003cp\u003ePower Train Inc - Driveshaft Trans Slip Yoke\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-3\"\u003e\n\u003cp\u003e\u003cspan\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_Side_480x480.png?v=1599244169\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_End_480x480.png?v=1599244232\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e"}

{"id":8940854533,"title":"Neapco N3-2-1579F Flange Yoke","handle":"n3-2-1579f","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003e\n\u003cstrong\u003eDriveshaft Flange Yoke\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBolt Circle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e4.250 Inch\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e1350\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eU-Joint Lock Up:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e3.625 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e1.188 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eFlange Face to Centerline: \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e1.62 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eHole \/ Thread Size:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e0.500 \u003cmeta charset=\"utf-8\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eJoint Angle:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e20.0 \u003cmeta charset=\"utf-8\"\u003eDegrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eNumber of Bolt Holes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePilot Diameter:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2.00 \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate in House Option:\u003cbr\u003e\u003c\/strong\u003ePTI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/3502-1579?variant=38872605261975\" title=\"PTI 3502-1579 Flange Yoke\"\u003e3502-1579 \u003c\/a\u003eFlange Yoke\u003cbr\u003e\u003cb\u003e\u003cbr\u003eReplacement Part:\u003cbr\u003e \u003c\/b\u003eNeapco N3-2-1579 Flange Yoke","published_at":"2017-06-21T15:29:21-04:00","created_at":"2017-08-29T13:17:42-04:00","vendor":"Neapco","type":"Flange Yoke","tags":["1PC.Cust.Shaft.Step3","3-2-1579","3502-1579","Bearing Cap Diameter_1.188\"","Bolt Circle_4.250\"","Brand_Neapco","Lock Up_3.625\"","Material_Steel","N321579","N321579F","Number of Bolt Holes_4","Part_Flange","Part_Flange Yoke","Part_Yoke","Pilot Diameter_2.000\" F","Series_1350","U-Joint Type_Outside Snap Ring","Vehicle_Ford","Yoke_Flange Yoke"],"price":5993,"price_min":5993,"price_max":5993,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41535200645,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N3-2-1579F","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco N3-2-1579F Flange Yoke","public_title":null,"options":["Default Title"],"price":5993,"weight":953,"compare_at_price":null,"inventory_quantity":-46,"inventory_management":null,"inventory_policy":"deny","barcode":"083869026374","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/774313.jpg?v=1504028818"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/774313.jpg?v=1504028818","options":["Title"],"media":[{"alt":null,"id":2400828096647,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/774313.jpg?v=1504028818"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/774313.jpg?v=1504028818","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003e\n\u003cstrong\u003eDriveshaft Flange Yoke\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBolt Circle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e4.250 Inch\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e1350\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eU-Joint Lock Up:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e3.625 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e1.188 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eFlange Face to Centerline: \u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e1.62 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eHole \/ Thread Size:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e0.500 \u003cmeta charset=\"utf-8\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eJoint Angle:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e20.0 \u003cmeta charset=\"utf-8\"\u003eDegrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003eNumber of Bolt Holes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePilot Diameter:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2.00 \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate in House Option:\u003cbr\u003e\u003c\/strong\u003ePTI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/3502-1579?variant=38872605261975\" title=\"PTI 3502-1579 Flange Yoke\"\u003e3502-1579 \u003c\/a\u003eFlange Yoke\u003cbr\u003e\u003cb\u003e\u003cbr\u003eReplacement Part:\u003cbr\u003e \u003c\/b\u003eNeapco N3-2-1579 Flange Yoke"}

{"id":8019231045,"title":"Spicer 5-1310X U-Joint","handle":"5-1310x","description":"\u003ch2\u003eSpicer Drive Shaft Universal Joint 5-1310X\u003c\/h2\u003e\n\u003cp\u003eSpicer U-Joint fits 1310 Series Applications.  Non-Greaseable, outside snap ring U-Joint. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003e\u003cstrong\u003eCold-forged from high-quality steel, Spicer Life Series® (SPL®) universal joints deliver the strength and durability that today’s performance vehicles demand.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eNon-greaseable u-joint (pre-lubricated for the life of the part)\u003c\/strong\u003e\u003cbr\u003e • For optimal friction reduction and higher temperature resistance \u003cbr\u003e\u003cstrong\u003eSynthetic thrust washer\u003c\/strong\u003e \u003cbr\u003e • Eliminates friction and end galling \u003cbr\u003e • Prevents the heat that breaks down grease\u003cbr\u003e\u003cstrong\u003eMulti-lip seal \u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e • \u003c\/span\u003eKeeps grease in—and contaminants out\u003cbr\u003e • Offers maximum retention in a wider range of environments\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreasable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eNone Greasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eOutside Snap Ring Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1310\/SPL22\/1280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.062\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e \/ 1.062\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSnap Ring:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e3.219 Inch \/ 3.219 \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003eCompatible Parts:\u003cbr\u003e\u003c\/b\u003e\u003c\/strong\u003eSpicer \u003ca title=\"Spicer 2-70-18X U-Joint Strap Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/2-70-18x?variant=31811266245\"\u003e2-70-18X\u003c\/a\u003e U-Joint Strap Kit\u003cbr\u003eSpicer \u003ca title=\"Spicer 2-94-28X U-Bolt Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/2-94-28x?variant=31813336261\"\u003e2-94-28X\u003c\/a\u003e U-Bolt Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e \u003cbr\u003eSpicer 5-785X U-Joint (Obsolete)\u003cbr\u003eNeapco \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/1-0153g?variant=4874627153957\" title=\"Neapco 1-0153G U-Joint\"\u003e1-0153G\u003c\/a\u003e U-Joint\u003cbr\u003ePTI P5-1310X U-Joint\u003c\/p\u003e","published_at":"2017-05-30T08:16:45-04:00","created_at":"2017-05-30T08:16:45-04:00","vendor":"Spicer\/Dana","type":"Universal Joint Kit","tags":["51310X","Brand_Spicer","Cap Size_1.06\"","CapSizeBullet_1.062\"","Grease_Non-Greasable","LockUpBullet_3.219\"","moog-269","moog-369","moog-379","moog-380","Part_U-Joint","Series_1280","Series_1310","Series_S55","Series_SPL 22","SeriesBullet_1310","Snap Ring to Snap Ring_3.22\"","U-Joint Type_Outside Snap Ring","UJointTypeBullet_Outside Snap Ring"],"price":2088,"price_min":2088,"price_max":2088,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30462719941,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5-1310X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spicer 5-1310X U-Joint","public_title":null,"options":["Default Title"],"price":2088,"weight":635,"compare_at_price":null,"inventory_quantity":-392,"inventory_management":null,"inventory_policy":"deny","barcode":"023913121181","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-1310x_uJoint_Spicer.jpg?v=1496755530","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-1310x-U-Joint_Spiccer.jpg?v=1496755530"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-1310x_uJoint_Spicer.jpg?v=1496755530","options":["Title"],"media":[{"alt":null,"id":2375169572999,"position":1,"preview_image":{"aspect_ratio":1.003,"height":1596,"width":1600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-1310x_uJoint_Spicer.jpg?v=1496755530"},"aspect_ratio":1.003,"height":1596,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-1310x_uJoint_Spicer.jpg?v=1496755530","width":1600},{"alt":null,"id":2375169605767,"position":2,"preview_image":{"aspect_ratio":1.321,"height":1211,"width":1600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-1310x-U-Joint_Spiccer.jpg?v=1496755530"},"aspect_ratio":1.321,"height":1211,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-1310x-U-Joint_Spiccer.jpg?v=1496755530","width":1600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSpicer Drive Shaft Universal Joint 5-1310X\u003c\/h2\u003e\n\u003cp\u003eSpicer U-Joint fits 1310 Series Applications.  Non-Greaseable, outside snap ring U-Joint. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003e\u003cstrong\u003eCold-forged from high-quality steel, Spicer Life Series® (SPL®) universal joints deliver the strength and durability that today’s performance vehicles demand.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eNon-greaseable u-joint (pre-lubricated for the life of the part)\u003c\/strong\u003e\u003cbr\u003e • For optimal friction reduction and higher temperature resistance \u003cbr\u003e\u003cstrong\u003eSynthetic thrust washer\u003c\/strong\u003e \u003cbr\u003e • Eliminates friction and end galling \u003cbr\u003e • Prevents the heat that breaks down grease\u003cbr\u003e\u003cstrong\u003eMulti-lip seal \u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e • \u003c\/span\u003eKeeps grease in—and contaminants out\u003cbr\u003e • Offers maximum retention in a wider range of environments\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreasable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eNone Greasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eOutside Snap Ring Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1310\/SPL22\/1280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.062\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e \/ 1.062\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSnap Ring:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e3.219 Inch \/ 3.219 \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003eCompatible Parts:\u003cbr\u003e\u003c\/b\u003e\u003c\/strong\u003eSpicer \u003ca title=\"Spicer 2-70-18X U-Joint Strap Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/2-70-18x?variant=31811266245\"\u003e2-70-18X\u003c\/a\u003e U-Joint Strap Kit\u003cbr\u003eSpicer \u003ca title=\"Spicer 2-94-28X U-Bolt Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/2-94-28x?variant=31813336261\"\u003e2-94-28X\u003c\/a\u003e U-Bolt Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e \u003cbr\u003eSpicer 5-785X U-Joint (Obsolete)\u003cbr\u003eNeapco \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/1-0153g?variant=4874627153957\" title=\"Neapco 1-0153G U-Joint\"\u003e1-0153G\u003c\/a\u003e U-Joint\u003cbr\u003ePTI P5-1310X U-Joint\u003c\/p\u003e"}

{"id":1587037372468,"title":"AAM 40021420 Trans Slip Yoke","handle":"40021420","description":"\u003ch2\u003eAAM Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSlip Yoke for GM vehicles with 1350\/1355 Series U-Joints, 32 spline and matching measurement specs. \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli class=\"current\" data-tab=\"tab-1\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"tab-1\" class=\"shopify-tab-content current\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTransmission and Transfer Case Applications:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFits various 32 spline transmission including Turbo 400 (TH400) with the long tailshaft,   6L50,  6L80E, \u0026amp; 241C. Also fits GMC transfer cases  BW4494,  BW4493,  BW4485,  NP205,  NP208,  NP241, NP241C,  NP243, NP246,  NP261,  NP263 and more. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1355 ( 1350)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Style:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOutside Snap Ring\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.188 Inch (30.17 MM)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Width (B):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.612  \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e (91.74 MM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of Spline)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.874 Inch (200.00 MM)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.886 Inch (47.90 MM)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.374 Inch (34.9 MM)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F)*:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 \u003cem\u003e(30 with blind spot - see note below*)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Counter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlated\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGM\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" alt=\"Driveshaft Slip Yoke Diagram Outside Snap Ring Style\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at3.07.11PM_480x480.png?v=1685128181\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at3.07.11PM_480x480.png?v=1685128181\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission Output Shaft Style\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThis is a fully splined slip yoke, i\u003cspan data-mce-fragment=\"1\"\u003ef you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e5.5” short barrel\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e counter\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ebored\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e slip yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Transmission_Slip_yoke_counterbore_480x480.png?v=1613663588\" alt=\"Transmission Slip yoke with and without counter bore\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Transmission_Slip_yoke_counterbore_480x480.png?v=1613663588\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-2\" class=\"shopify-tab-content\"\u003e\n\u003ch5\u003eAAM driveshaft components are designed, tested and manufactured to maximize performance and durability. All driveshaft components meet the OEM specifications because they are the authentic OEM products. The same products AAM use to build driveshafts used by vehicle manufacturers around the world Designed utilizing the latest technology, this product by American Axle features premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle, it is manufactured to meet or exceed stringent industry standards. \u003c\/h5\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-3\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cspan\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Slip_Yoke_Side_Diagram_480x480.png?v=1599676229\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Slip_Yoke_Side_Diagram_480x480.png?v=1599676229\"\u003e\u003cimg alt=\"Slip Yoke\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/AMI_Slip_Yoke_diagram.b_480x480.png?v=1580313458\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/AMI_Slip_Yoke_diagram.b_480x480.png?v=1580313458\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Numbers:\u003c\/strong\u003e \u003cbr\u003eSpicer  \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/3-3-5551x?variant=37912111109\" title=\"Spicer 3-3-5551X Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3-3-5551x?variant=37912111109\"\u003e3-3-5551x\u003c\/a\u003e Slip Yoke \u003cspan data-mce-fragment=\"1\"\u003e( Counterbored) \u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eSonnax \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/t3-3-5551hp?variant=5157352276005\" title=\"Sonnax T3-3-5551HP Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/t3-3-5551hp?variant=5157352276005\"\u003eT3-3-5551HP\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e Slip Yoke (Counterbored)\u003c\/span\u003e\u003cbr\u003eNeapco \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/n3-3-9467x?variant=5138078793765\" title=\"Neapco N3-3-9467X Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/n3-3-9467x?variant=5138078793765\"\u003eN3-3-9467x\u003c\/a\u003e Slip Yoke (Full Spline)\u003cbr\u003ePTI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/3503-32?variant=39005518266519\" title=\"PTI 3503-32 Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3503-32?variant=39005518266519\"\u003e3503-32 \u003c\/a\u003eSlip Yoke  \u003cspan data-mce-fragment=\"1\"\u003e(Full Spline)\u003c\/span\u003e\u003cbr\u003ePTI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/3503-3202?variant=39005556867223\" title=\"PTI 3503-3202 Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3503-3202?variant=39005556867223\"\u003e3503-3202\u003c\/a\u003e Slip Yoke (Vented\/ \u003cspan data-mce-fragment=\"1\"\u003eFull Spline\u003c\/span\u003e)  \u003cspan data-mce-fragment=\"1\"\u003e(Drop Shipped)\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eAAM \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/40106885?variant=40834937847959\" title=\"AAM 40106885 Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/40106885?variant=40834937847959\"\u003e40106885\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e Slip Yoke (Vented\/ Full Spline) (Drop Shipped)\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eAAM \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/40106860?variant=43742650958051\" title=\"AAM 40106860 Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/40106860?variant=43742650958051\"\u003e40106860\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e Slip Yoke (Vented\/ Full Spline) (Drop Shipped)\u003c\/span\u003e\u003cbr\u003e7839467, 88964470, 74089467, 22944357, 05093380AA, 74081420\u003c\/p\u003e","published_at":"2017-08-01T11:29:24-04:00","created_at":"2019-02-26T10:22:53-05:00","vendor":"AAM","type":"Slip Yoke","tags":["22944357","3-3-5551x","7408120","74089467","7839467","88964470","Application_Applications: Fits various 32 spline output shaft long tail shaft housing transmissions as well as transfer cases.","Barrel OD_1.89\"","Bearing Cap Diameter_1.188\"","Brand_AAM","BW4485","BW4493","BW4494","Length_7.87\"","Lock Up_3.622\"","mpn4546774989","N3-3-9467x","NP205","NP208","NP241","NP241C","NP243","NP246","NP263","NP263HD","Part_Transmission Slip Yoke","Part_Yoke","Series_1355","Spline Diameter_1.38\"","Spline_32","Transfer Case Slip Assembly","Transfer Case_241C","Transfer Case_BW4485","Transfer Case_BW4493","Transfer Case_BW4494","Transfer Case_NP205","Transfer Case_NP208","Transfer Case_NP241","Transfer Case_NP241C","Transfer Case_NP243","Transfer Case_NP246","Transfer Case_NP261HD","Transfer Case_NP263","Transfer Case_NP263HD","Transmission Make_GM","Transmission Model_4L80E Long Tail","Transmission Model_6L50","Transmission Model_6L80E","Transmission Model_TH-400 Long Tail","Transmission Slip Assembly","U-Joint Type_Outside Snap Ring","Vehicle_GM","Yoke_Transfer Case Slip Yoke","Yoke_Transmission Slip Yoke"],"price":8910,"price_min":8910,"price_max":8910,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14169775865908,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"40021420","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AAM 40021420 Trans Slip Yoke","public_title":null,"options":["Default Title"],"price":8910,"weight":1950,"compare_at_price":null,"inventory_quantity":-84,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.c.jpg?v=1551360593","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.b.jpg?v=1551360593","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.a.jpg?v=1551360593","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.d.jpg?v=1551360593","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.e.jpg?v=1551360593","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.f.jpg?v=1551360593"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.c.jpg?v=1551360593","options":["Title"],"media":[{"alt":null,"id":2668500353159,"position":1,"preview_image":{"aspect_ratio":0.633,"height":1500,"width":949,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.c.jpg?v=1551360593"},"aspect_ratio":0.633,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.c.jpg?v=1551360593","width":949},{"alt":null,"id":2668500320391,"position":2,"preview_image":{"aspect_ratio":0.618,"height":1500,"width":927,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.b.jpg?v=1551360593"},"aspect_ratio":0.618,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.b.jpg?v=1551360593","width":927},{"alt":null,"id":2668500287623,"position":3,"preview_image":{"aspect_ratio":0.539,"height":1500,"width":809,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.a.jpg?v=1551360593"},"aspect_ratio":0.539,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.a.jpg?v=1551360593","width":809},{"alt":null,"id":2668500385927,"position":4,"preview_image":{"aspect_ratio":0.495,"height":1500,"width":742,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.d.jpg?v=1551360593"},"aspect_ratio":0.495,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.d.jpg?v=1551360593","width":742},{"alt":null,"id":2668500418695,"position":5,"preview_image":{"aspect_ratio":1.405,"height":1500,"width":2107,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.e.jpg?v=1551360593"},"aspect_ratio":1.405,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.e.jpg?v=1551360593","width":2107},{"alt":null,"id":2668500451463,"position":6,"preview_image":{"aspect_ratio":1.359,"height":1500,"width":2038,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.f.jpg?v=1551360593"},"aspect_ratio":1.359,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/40021420.f.jpg?v=1551360593","width":2038}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eAAM Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSlip Yoke for GM vehicles with 1350\/1355 Series U-Joints, 32 spline and matching measurement specs. \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli class=\"current\" data-tab=\"tab-1\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"tab-1\" class=\"shopify-tab-content current\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTransmission and Transfer Case Applications:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eFits various 32 spline transmission including Turbo 400 (TH400) with the long tailshaft,   6L50,  6L80E, \u0026amp; 241C. Also fits GMC transfer cases  BW4494,  BW4493,  BW4485,  NP205,  NP208,  NP241, NP241C,  NP243, NP246,  NP261,  NP263 and more. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1355 ( 1350)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Style:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOutside Snap Ring\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.188 Inch (30.17 MM)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Width (B):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.612  \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e (91.74 MM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of Spline)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.874 Inch (200.00 MM)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.886 Inch (47.90 MM)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.374 Inch (34.9 MM)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F)*:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 \u003cem\u003e(30 with blind spot - see note below*)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Counter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlated\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGM\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" alt=\"Driveshaft Slip Yoke Diagram Outside Snap Ring Style\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at3.07.11PM_480x480.png?v=1685128181\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at3.07.11PM_480x480.png?v=1685128181\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission Output Shaft Style\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThis is a fully splined slip yoke, i\u003cspan data-mce-fragment=\"1\"\u003ef you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e5.5” short barrel\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e counter\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ebored\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e slip yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Transmission_Slip_yoke_counterbore_480x480.png?v=1613663588\" alt=\"Transmission Slip yoke with and without counter bore\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Transmission_Slip_yoke_counterbore_480x480.png?v=1613663588\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-2\" class=\"shopify-tab-content\"\u003e\n\u003ch5\u003eAAM driveshaft components are designed, tested and manufactured to maximize performance and durability. All driveshaft components meet the OEM specifications because they are the authentic OEM products. The same products AAM use to build driveshafts used by vehicle manufacturers around the world Designed utilizing the latest technology, this product by American Axle features premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle, it is manufactured to meet or exceed stringent industry standards. \u003c\/h5\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-3\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cspan\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Slip_Yoke_Side_Diagram_480x480.png?v=1599676229\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Slip_Yoke_Side_Diagram_480x480.png?v=1599676229\"\u003e\u003cimg alt=\"Slip Yoke\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/AMI_Slip_Yoke_diagram.b_480x480.png?v=1580313458\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/AMI_Slip_Yoke_diagram.b_480x480.png?v=1580313458\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Numbers:\u003c\/strong\u003e \u003cbr\u003eSpicer  \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/3-3-5551x?variant=37912111109\" title=\"Spicer 3-3-5551X Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3-3-5551x?variant=37912111109\"\u003e3-3-5551x\u003c\/a\u003e Slip Yoke \u003cspan data-mce-fragment=\"1\"\u003e( Counterbored) \u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eSonnax \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/t3-3-5551hp?variant=5157352276005\" title=\"Sonnax T3-3-5551HP Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/t3-3-5551hp?variant=5157352276005\"\u003eT3-3-5551HP\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e Slip Yoke (Counterbored)\u003c\/span\u003e\u003cbr\u003eNeapco \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/n3-3-9467x?variant=5138078793765\" title=\"Neapco N3-3-9467X Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/n3-3-9467x?variant=5138078793765\"\u003eN3-3-9467x\u003c\/a\u003e Slip Yoke (Full Spline)\u003cbr\u003ePTI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/3503-32?variant=39005518266519\" title=\"PTI 3503-32 Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3503-32?variant=39005518266519\"\u003e3503-32 \u003c\/a\u003eSlip Yoke  \u003cspan data-mce-fragment=\"1\"\u003e(Full Spline)\u003c\/span\u003e\u003cbr\u003ePTI \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/3503-3202?variant=39005556867223\" title=\"PTI 3503-3202 Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3503-3202?variant=39005556867223\"\u003e3503-3202\u003c\/a\u003e Slip Yoke (Vented\/ \u003cspan data-mce-fragment=\"1\"\u003eFull Spline\u003c\/span\u003e)  \u003cspan data-mce-fragment=\"1\"\u003e(Drop Shipped)\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eAAM \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/40106885?variant=40834937847959\" title=\"AAM 40106885 Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/40106885?variant=40834937847959\"\u003e40106885\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e Slip Yoke (Vented\/ Full Spline) (Drop Shipped)\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eAAM \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/40106860?variant=43742650958051\" title=\"AAM 40106860 Trans Slip Yoke\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/40106860?variant=43742650958051\"\u003e40106860\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e Slip Yoke (Vented\/ Full Spline) (Drop Shipped)\u003c\/span\u003e\u003cbr\u003e7839467, 88964470, 74089467, 22944357, 05093380AA, 74081420\u003c\/p\u003e"}

{"id":8019223621,"title":"PTI 2903-30 Trans Slip Yoke","handle":"2903-30","description":"\u003ch2\u003ePTI Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli class=\"current\" data-tab=\"tab-1\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"tab-1\" class=\"shopify-tab-content current\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp;\u003cspan\u003e \u003c\/span\u003eTransfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFits various Chrysler, Dodge and Ram transmission with 30 spline output shafts including 45RFE, 46RH, 47RE, 47RH, 48RE, 48DG8, 545RFE, 545DGQ, 65RFE, A500, A518, A727, A833 and more. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\" style=\"width: 100.088%; height: 349.094px;\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eU-Joint Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e7290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eU-Joint Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e\n\u003cspan\u003e1.125\u003c\/span\u003e Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\n\u003cstrong\u003eDistance Between Machined Flats (B):\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e\n\u003cspan\u003e2.625\u003c\/span\u003e Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 39.1875px;\"\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of \u003cmeta charset=\"utf-8\"\u003eBarrel)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 39.1875px;\"\u003e8.031 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eBarrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e1.681 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e1.312 Inch\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eNumber of Spline (F):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e30 \u003cem\u003e(29 with blind spot - see note below*)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003e Joint Angle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eSpline Counter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003e Counter Bore Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e1.455 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003e Counter Bore Depth:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e1.500 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eVehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003eDodge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eOEM Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e\u003cspan\u003e2781932 (Detroit)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.5101%;\"\u003e\u003cstrong\u003eDriveshaft Category:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%;\"\u003e\n\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 7290 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_7290+spline-count_30\"\u003e Ea\u003c\/a\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 1410 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_1410+spline-count_30\"\u003e\u003c\/a\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 1310 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_1310+spline-count_30\"\u003e\u003c\/a\u003e, \u003ca title=\"Custom Driveshafts with Slip Yoke 7290 + 30 + Eb\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/u-joint-series_7290+spline-count_30+trans-category_eb\"\u003eEb\u003c\/a\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke 1410 + 30 + Eb\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/u-joint-series_1410+spline-count_30+trans-category_eb\"\u003e\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at10.16.47AM_7106c564-6ca4-4d69-9f20-f498f7a1fd3d_600x600.png?v=1685111601\" alt=\"Transmission Slip Yoke Diagram Inside Snap Ring Style\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-2\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003eParts story from the manufacturer:\u003c\/p\u003e\n\u003cp\u003eThis Dodge transmission yoke is made in the 7290 series and fits the common Dodge 704 transmission. It also fits the A518, 46RH, 46RE and the 47RE Dodge transmissions.\u003c\/p\u003e\n\u003cp\u003eThis slip yoke is known to fit other transmissions. Always confirm your slip yoke dimensions prior to ordering. \u003c\/p\u003e\n\u003cp\u003eThe Detroit number is 2781932.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-3\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cspan\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_Side_600x600.png?v=1599244169\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_End_480x480.png?v=1599244232\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e","published_at":"2017-09-19T12:48:31-04:00","created_at":"2017-05-30T08:16:00-04:00","vendor":"PTI","type":"Slip Yoke","tags":["2781932","290330","45RFE","46RE","46RH","47RE","47RH","Application_Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions including","Barrel OD_1.68\"","Bearing Cap Diameter_1.125\"","Brand_PTI","Length_8.03\"","Lock Up_2.625\"","Part_Transmission Slip Yoke","Part_Yoke","Series_7290","Spline Diameter_1.31\"","Spline_30","TorqueFlite 727","Trans. Category_Ea","Trans. Category_Eb","Transmission Make_Chrysler","Transmission Make_Dodge","Transmission Model_45RFE","Transmission Model_46RE","Transmission Model_46RH","Transmission Model_47RE","Transmission Model_47RH","Transmission Model_48RE","Transmission Model_545RFE","Transmission Model_65RFE","Transmission Model_727","Transmission Model_A500","Transmission Model_A518","Transmission Model_A833","Transmission Model_TorqueFlite 727","Transmission Slip Assembly","U-Joint Type_Inside Snap Ring","Vehicle_Dodge","Yoke_Transmission Slip Yoke"],"price":8226,"price_min":8226,"price_max":8226,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30462696517,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2903-30","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PTI 2903-30 Trans Slip Yoke","public_title":null,"options":["Default Title"],"price":8226,"weight":1724,"compare_at_price":null,"inventory_quantity":-89,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2903-30.1423786689.9962.-PTIWM.jpg?v=1695828625","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/290330_Slip_Yoke.jpg?v=1695828437","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2903-30.1423786698.1867.-PTIWM.jpg?v=1601379291"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2903-30.1423786689.9962.-PTIWM.jpg?v=1695828625","options":["Title"],"media":[{"alt":null,"id":12189483335831,"position":1,"preview_image":{"aspect_ratio":0.51,"height":500,"width":255,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2903-30.1423786689.9962.-PTIWM.jpg?v=1695828625"},"aspect_ratio":0.51,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2903-30.1423786689.9962.-PTIWM.jpg?v=1695828625","width":255},{"alt":null,"id":2374979944583,"position":2,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/290330_Slip_Yoke.jpg?v=1695828437"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/290330_Slip_Yoke.jpg?v=1695828437","width":600},{"alt":null,"id":12189486645399,"position":3,"preview_image":{"aspect_ratio":2.066,"height":242,"width":500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2903-30.1423786698.1867.-PTIWM.jpg?v=1601379291"},"aspect_ratio":2.066,"height":242,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2903-30.1423786698.1867.-PTIWM.jpg?v=1601379291","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003ePTI Drive Shaft Transmission Slip Yoke\u003c\/h2\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli class=\"current\" data-tab=\"tab-1\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eDiagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"tab-1\" class=\"shopify-tab-content current\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp;\u003cspan\u003e \u003c\/span\u003eTransfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFits various Chrysler, Dodge and Ram transmission with 30 spline output shafts including 45RFE, 46RH, 47RE, 47RH, 48RE, 48DG8, 545RFE, 545DGQ, 65RFE, A500, A518, A727, A833 and more. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\" style=\"width: 100.088%; height: 349.094px;\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eU-Joint Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e7290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eU-Joint Cap Diameter (A):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e\n\u003cspan\u003e1.125\u003c\/span\u003e Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\n\u003cstrong\u003eDistance Between Machined Flats (B):\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e\n\u003cspan\u003e2.625\u003c\/span\u003e Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 39.1875px;\"\u003e\n\u003cstrong\u003eSlip Yoke Length (C):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of \u003cmeta charset=\"utf-8\"\u003eBarrel)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 39.1875px;\"\u003e8.031 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eBarrel Diameter (D):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e1.681 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eSpline Diameter (E):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e1.312 Inch\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eNumber of Spline (F):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e30 \u003cem\u003e(29 with blind spot - see note below*)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003e Joint Angle:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eSpline Counter Bore:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003e Counter Bore Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e1.455 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003e Counter Bore Depth:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e1.500 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eVehicle Make:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003eDodge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.5101%; height: 19.5938px;\"\u003e\u003cstrong\u003eOEM Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%; height: 19.5938px;\"\u003e\u003cspan\u003e2781932 (Detroit)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.5101%;\"\u003e\u003cstrong\u003eDriveshaft Category:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 50.2225%;\"\u003e\n\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 7290 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_7290+spline-count_30\"\u003e Ea\u003c\/a\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 1410 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_1410+spline-count_30\"\u003e\u003c\/a\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke Ea + 1310 + 30\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/trans-category_ea+u-joint-series_1310+spline-count_30\"\u003e\u003c\/a\u003e, \u003ca title=\"Custom Driveshafts with Slip Yoke 7290 + 30 + Eb\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/u-joint-series_7290+spline-count_30+trans-category_eb\"\u003eEb\u003c\/a\u003e\u003ca title=\"Custom Driveshafts with Slip Yoke 1410 + 30 + Eb\" href=\"https:\/\/www.actionmachineinc.com\/collections\/custom-driveshafts-with-slip-yoke\/u-joint-series_1410+spline-count_30+trans-category_eb\"\u003e\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at10.16.47AM_7106c564-6ca4-4d69-9f20-f498f7a1fd3d_600x600.png?v=1685111601\" alt=\"Transmission Slip Yoke Diagram Inside Snap Ring Style\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-2\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003eParts story from the manufacturer:\u003c\/p\u003e\n\u003cp\u003eThis Dodge transmission yoke is made in the 7290 series and fits the common Dodge 704 transmission. It also fits the A518, 46RH, 46RE and the 47RE Dodge transmissions.\u003c\/p\u003e\n\u003cp\u003eThis slip yoke is known to fit other transmissions. Always confirm your slip yoke dimensions prior to ordering. \u003c\/p\u003e\n\u003cp\u003eThe Detroit number is 2781932.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"tab-3\" class=\"shopify-tab-content\"\u003e\n\u003cp\u003e\u003cspan\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_Side_600x600.png?v=1599244169\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/SlipYoke_InsideU-Joint_End_480x480.png?v=1599244232\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e"}

{"id":9175201221,"title":"Neapco 2-1435 U-Joint","handle":"2-1435","description":"\u003ch2\u003eDrive Shaft Universal Joint - Conversion Joint\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eNeapco u-joint fits applications with 1350 Series on two caps and 1410 on the other 2 caps. \u003c\/p\u003e\n\u003cinput name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eDiagrams\u003c\/label\u003e\n\u003csection id=\"content1\"\u003eNeapco Universal Joint, Conversion Joint 1350 to 1410\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCross 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCross 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries Conversion:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e1350\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e1410\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eOutside Snap Ring (OSR)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eOutside Snap Ring (OSR)\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e1.188 Inch (30.175 mm) (D1)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e1.188 Inch (30.175 mm) (D2)\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eLock Up \/ Length:\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e*Snap Ring to Snap Ring\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e3.625 Inch (92.1 mm) (G1)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e4.187 Inch (106.350 mm) (G2)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNon-Greaseable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003eSnap Rings Included:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eEach \/ Qty 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"U-joint Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_240x240.jpg?v=1576607867\" data-mce-style=\"float: none;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_240x240.jpg?v=1576607867\"\u003e.\n\u003csection data-mce-fragment=\"1\" id=\"content2\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e6\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_240x240.jpg?v=1576607867\" alt=\"U-joint Diagram\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_240x240.jpg?v=1576607867\"\u003e\u003c\/div\u003e\n\u003c\/section\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCompatible\u003c\/b\u003e Parts:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eSpicer \u003ca data-mce-fragment=\"1\" title=\"Spicer 3-70-28X U-Joint Strap Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/3-70-28x?variant=38130258501\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3-70-28x?variant=38130258501\"\u003e3-70-28X\u003c\/a\u003e Strap Kit (1350 \u0026amp; 1410)\u003cbr data-mce-fragment=\"1\"\u003eSpicer \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/3-94-18x?variant=31833128645\" title=\"Spicer 3-94-18X U-Bolt Kit\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3-94-18x?variant=31833128645\"\u003e3-94-18X\u003c\/a\u003e U-Bolt Kit (1350 \u0026amp; 1410)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg alt=\"U-joint Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_9966_240x240.jpg?v=1576607891\"\u003e\u003cimg height=\"480x480\" width=\"480x480\" alt=\"U-joint Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_480x480.jpg?v=1576607867\"\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #DE330E;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2017-05-30T08:15:49-04:00","created_at":"2017-10-16T07:18:21-04:00","vendor":"Neapco","type":"Universal Joint Kit","tags":["21435","Brand_Neapco","Cap Size_1.19\"","CapSizeBullet_1.188\"","conversion","Grease_Non-Greasable","LockUpBullet_3.622\" X 4.187\"","Part_U-Joint","Series_1350","Series_1350 X 1410","Series_1410","Series_O55","Series_SPL 36","SeriesBullet_1350 X 1410","Snap Ring to Snap Ring_3.62\"","Snap Ring to Snap Ring_4.19\"","U-Joint Type_Conversion","U-Joint Type_Outside Snap Ring","UJointTypeBullet_Outside Snap Ring"],"price":3938,"price_min":3938,"price_max":3938,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44436350213,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2-1435","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco 2-1435 U-Joint","public_title":null,"options":["Default Title"],"price":3938,"weight":953,"compare_at_price":null,"inventory_quantity":-46,"inventory_management":null,"inventory_policy":"deny","barcode":"083869214351","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-1435.jpg?v=1508153140"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-1435.jpg?v=1508153140","options":["Title"],"media":[{"alt":null,"id":2405070504071,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-1435.jpg?v=1508153140"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-1435.jpg?v=1508153140","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eDrive Shaft Universal Joint - Conversion Joint\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eNeapco u-joint fits applications with 1350 Series on two caps and 1410 on the other 2 caps. \u003c\/p\u003e\n\u003cinput name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eDiagrams\u003c\/label\u003e\n\u003csection id=\"content1\"\u003eNeapco Universal Joint, Conversion Joint 1350 to 1410\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCross 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCross 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries Conversion:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e1350\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e1410\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eOutside Snap Ring (OSR)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eOutside Snap Ring (OSR)\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e1.188 Inch (30.175 mm) (D1)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e1.188 Inch (30.175 mm) (D2)\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eLock Up \/ Length:\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e*Snap Ring to Snap Ring\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e3.625 Inch (92.1 mm) (G1)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e4.187 Inch (106.350 mm) (G2)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNon-Greaseable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003eSnap Rings Included:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eEach \/ Qty 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\n\u003cimg style=\"float: none;\" alt=\"U-joint Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_240x240.jpg?v=1576607867\" data-mce-style=\"float: none;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_240x240.jpg?v=1576607867\"\u003e.\n\u003csection data-mce-fragment=\"1\" id=\"content2\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e6\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_240x240.jpg?v=1576607867\" alt=\"U-joint Diagram\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_240x240.jpg?v=1576607867\"\u003e\u003c\/div\u003e\n\u003c\/section\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCompatible\u003c\/b\u003e Parts:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eSpicer \u003ca data-mce-fragment=\"1\" title=\"Spicer 3-70-28X U-Joint Strap Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/3-70-28x?variant=38130258501\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3-70-28x?variant=38130258501\"\u003e3-70-28X\u003c\/a\u003e Strap Kit (1350 \u0026amp; 1410)\u003cbr data-mce-fragment=\"1\"\u003eSpicer \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/3-94-18x?variant=31833128645\" title=\"Spicer 3-94-18X U-Bolt Kit\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3-94-18x?variant=31833128645\"\u003e3-94-18X\u003c\/a\u003e U-Bolt Kit (1350 \u0026amp; 1410)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cimg alt=\"U-joint Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_9966_240x240.jpg?v=1576607891\"\u003e\u003cimg height=\"480x480\" width=\"480x480\" alt=\"U-joint Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-1350X_Drawing_2_9967_480x480.jpg?v=1576607867\"\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #DE330E;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3751083180084,"title":"Rockford 430-11 U-Joint \"Staked In\"","handle":"430-11","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-11\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.\u003cmeta charset=\"utf-8\"\u003e947 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.900 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSnap Ring Style:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eBMW, \u003cem\u003e735i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1987,1988, 1989, 1990, 1991, 1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003e750i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003eM5\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eDiahatsu, \u003cem\u003eRocky (Rear)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1990, 1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003e929\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2000\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1979, 1980, 1981, 1982, 1983, 1984\u003cbr\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eB2200\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1979, 1980, 1981, 1982, 1983, 1984\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1987, 1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2600\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1987, \u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eMPV (2WD)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eMX7 Turbo\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1987, \u003c\/span\u003e\u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-12T09:15:02-04:00","created_at":"2019-07-12T09:15:02-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["43011","Brand_Rockford","Cap Size_0.95\"","CapSizeBullet_0.947\"","Grease_Greasable","LockUpBullet_1.900\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.90\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_BMW","Vehicle_Diahatsu","Vehicle_Mazda"],"price":2891,"price_min":2891,"price_max":2891,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28972597116980,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-11","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rockford 430-11 U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":2891,"weight":454,"compare_at_price":null,"inventory_quantity":-179,"inventory_management":null,"inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.34.jpg?v=1562937590","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.jpg?v=1562937594"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.34.jpg?v=1562937590","options":["Title"],"media":[{"alt":null,"id":3027391414407,"position":1,"preview_image":{"aspect_ratio":0.989,"height":1517,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.34.jpg?v=1562937590"},"aspect_ratio":0.989,"height":1517,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.34.jpg?v=1562937590","width":1500},{"alt":null,"id":3027391479943,"position":2,"preview_image":{"aspect_ratio":1.148,"height":1307,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.jpg?v=1562937594"},"aspect_ratio":1.148,"height":1307,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.jpg?v=1562937594","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-11\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.\u003cmeta charset=\"utf-8\"\u003e947 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.900 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSnap Ring Style:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eBMW, \u003cem\u003e735i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1987,1988, 1989, 1990, 1991, 1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003e750i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003eM5\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eDiahatsu, \u003cem\u003eRocky (Rear)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1990, 1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003e929\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2000\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1979, 1980, 1981, 1982, 1983, 1984\u003cbr\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eB2200\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1979, 1980, 1981, 1982, 1983, 1984\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1987, 1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2600\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1987, \u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eMPV (2WD)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eMX7 Turbo\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1987, \u003c\/span\u003e\u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}