Free ground shipping on all driveshafts and orders over $100 within the continental USA! 

Custom one piece driveshafts with slip yoke - Chrysler/Dodge/Ram, Transmission 30/29 Spline

Custom One Piece Driveshaft Identifier.

Click the buttons below to find your custom driveshaft. This is page 1 and you will pick your transmission or transfers case make, and then model. If you do not know your model you can select your spline count instead.

  • Custom One Piece Driveshafts
  • Built in the USA
  • Balanced & Ready to Bolt In
  • Exactly what you want, race upgrade available
  • Free Ground Shipping in Continental US
  • 100% custom built to order Driveshafts

Contact us if you have any questions:
CHAT PHONE (574)287-9650

 

Output type: Slip Yoke | Drive Type: 2WD | Chrysler/Dodge/Ram | Transmission Category

U-Joint Size:

Start Over
Output Type: Slip Yoke X
Drive Type: 2WD / RWD X
Transmission Make: Chrysler / Dodge / Ram X
Transmission Model: 30 Spline X

 

U-Joint Quick Reference Guide:

All Action Machine Inc. driveshafts are built with Premium Dana/Spicer, Non-Greasable U-joints

 

Output type: Slip Yoke | Drive Type: 2WD | Transmission Make: Chrysler, Dodge or Ram | Transmission Category | U-Joint 7260

What material you like your driveshaft made from?

Start Over
Output Type: Slip Yoke X
Drive Type: 2WD / RWD X
Transmission Make: Chrysler / Dodge / Ram X
Transmission Model: 30 Spline X
U-joint Size: 7260 X

 

Steel
Aluminum

 

Driveshaft Material Guide: 7260 Series

Steel

Steel Driveshaft with Slipyoke

Tube Diameter Max Custom Length:
3.0 Inch Up to 56 inches - Center to Center of U-Joint
3.5 Inch Up to 61 Inches - Center to Center of U-Joint
4.0 Inch Up to 68 Inches - Center to Center of U-Joint

Tube Material: 0.083 Inch Wall DOM Seamless

Steel is our most popular material choice due to its versatility, high strength and economical price. 

Aluminum

Aluminum Driveshaft With Slipyoke

Tube Diameter Max Custom Length
3.0 Inch Up to 56 inches - Center to Center of U-Joint
3.5 Inch Up to 61 Inches - Center to Center of U-Joint

Tube Material: 0.125 Inch Wall 6061-T6 Seamless

Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

 

Output type: Slip Yoke | Drive Type: 2WD | Transmission Make: Chrysler, Dodge or Ram | Transmission Category | U-Joint 7290

What material you like your driveshaft made from?

Start Over
Output Type: Slip Yoke X
Drive Type: 2WD / RWD X
Transmission Make: Chrysler / Dodge / Ram X
Transmission Model: 30 Spline X
U-joint Size: 7290 X

 

Steel
Aluminum

 

Driveshaft Material Guide: 7290 Series

Steel

Steel Driveshaft with Slipyoke

Tube Diameter Max Custom Length:
3.0 Inch Up to 56 inches - Center to Center of U-Joint
3.5 Inch Up to 61 Inches - Center to Center of U-Joint
4.0 Inch Up to 68 Inches - Center to Center of U-Joint

Tube Material: 0.083 Inch Wall DOM Seamless

Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Aluminum Driveshaft With Slipyoke

Tube Diameter Max Custom Length
3.0 Inch Up to 56 inches - Center to Center of U-Joint
3.5 Inch Up to 61 Inches - Center to Center of U-Joint
4.0 Inch Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch Up to 85.75 inches - Center to Center of U-Joint

Tube Material: 0.125 Inch Wall 6061-T6 Seamless

Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

 

Output type: Slip Yoke | Drive Type: 2WD | Transmission Make: Chrysler, Dodge or Ram | Transmission Category | U-Joint 1310

What material you like your driveshaft made from?

Start Over
Output Type: Slip Yoke X
Drive Type: 2WD / RWD X
Transmission Make: Chrysler / Dodge / Ram X
Transmission Model: 30 Spline X
U-joint Size: 1310 X

 

Steel
Aluminum

 

Driveshaft Material Guide: 1310 Series

Steel

Steel Driveshaft with Slipyoke

Tube Diameter Max Custom Length:
3.0 Inch Up to 56 inches - Center to Center of U-Joint
3.5 Inch Up to 61 Inches - Center to Center of U-Joint
4.0 Inch Up to 68 Inches - Center to Center of U-Joint

Tube Material: 0.083 Inch Wall DOM Seamless

Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Aluminum Driveshaft With Slipyoke

Tube Diameter Max Custom Length
3.0 Inch Up to 56 inches - Center to Center of U-Joint
3.5 Inch Up to 61 Inches - Center to Center of U-Joint
4.0 Inch Up to 72.5 Inches - Center to Center of U-Joint

Tube Material: 0.125 Inch Wall 6061-T6 Seamless

Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

 

Output type: Slip Yoke | Drive Type: 2WD | Transmission Make: Chrysler, Dodge or Ram | Transmission Category | U-Joint 1350

What material you like your driveshaft made from?

Start Over
Output Type: Slip Yoke X
Drive Type: 2WD / RWD X
Transmission Make: Chrysler / Dodge / Ram X
Transmission Model: 30 Spline X
U-joint Size: 1350 X

 

Steel
Aluminum

 

Driveshaft Material Guide: 1350 Series

Steel

Steel Driveshaft with Slipyoke

Tube Diameter Max Custom Length:
3.0 Inch Up to 56 inches - Center to Center of U-Joint
3.5 Inch Up to 61 Inches - Center to Center of U-Joint
4.0 Inch Up to 68 Inches - Center to Center of U-Joint

Tube Material: 0.083 Inch Wall DOM Seamless

Steel is our most popular material choice due to its versatility, high strength and economical price. 

Aluminum

Aluminum Driveshaft With Slipyoke

Tube Diameter Max Custom Length
3.0 Inch Up to 56 inches - Center to Center of U-Joint
3.5 Inch Up to 61 Inches - Center to Center of U-Joint
4.0 Inch Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch Up to 85.75 inches - Center to Center of U-Joint

Tube Material: 0.125 Inch Wall 6061-T6 Seamless

Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

If you do not see your vehicle option, contact us today for cataloging:  CHAT   Phone  (574) 287-9650