Custom one piece driveshafts with slip yoke - GM, Transfer Case 32/31 Spline, 6.0-8.5 Slip Yoke Length

Outside Snap Ring U-joint

Series	Width	Cap Diameter	Max HP
1310	3 - ⁷₃₂(3.219)	1 - ¹₁₆(1.063)	500
1310 Ford	3 - ⁷₃₂(3.219)	1 - ¹₈(1.125)	500
1330	3 - ⁵₈(3.625)	1 - ¹₁₆(1.063)	700
1330 Ford	3 - ⁵₈(3.625)	1 - ¹₈(1.125)	700
1350	3 - ⁵₈(3.625)	1 - ³₁₆(1.188)	1000
1410	4 - ³₁₆(4.188)	1 - ³₁₆(1.188)	1000
Full Outside Snap Ring Measuring Guide

Inside Snap Ring U-joint

Series	Width	Cap Diameter	Max HP
7260	2 - ¹₈(2.125)	1 - ⁵₆₄(1.078)	500
7290	2 - ⁵₈(2.625)	1 - ¹₈(1.125)	700
3R	2 - ⁹₁₆(2.563)	1 - ¹₈(1.125)	700
Full Inside Snap Ring Measuring Guide

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 1310

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

U-joint Size: 1310 X

Steel

Aluminum

Driveshaft Material Guide: 1310 Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 Inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 1310 Ford

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

U-joint Size: 1310 Ford X

Steel

Aluminum

Driveshaft Material Guide: 1310 Ford Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 Inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 1330

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

U-joint Size: 1330 X

Steel

Aluminum

Driveshaft Material Guide: 1330 Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch	Up to 85.75 inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 1330 Ford

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

U-joint Size: 1330 Ford X

Steel

Aluminum

Driveshaft Material Guide: 1330 Ford Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch	Up to 85.75 inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 1350

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

Driveshaft Material Guide: 1350 Series

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch	Up to 85.75 inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish.

Carbon Fiber

Tube Diameter	Max Custom Length:
3.50 Inch ID / 3.65 Inch OD	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.155 Inch Wall Seamless Carbon Fiber Carbon Fiber is ultra-light weight, incredibly strong, and engineered to handle today’s highest torque loads.

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 1410

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

U-joint Size: 1410 X

Steel

Aluminum

Driveshaft Material Guide: 1410 Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
4.0 Inch	Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch	Up to 85.75 inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 7260

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

U-joint Size: 7260 X

Steel

Aluminum

Driveshaft Material Guide: 7260 Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish.

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 7290

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

U-joint Size: 7290 X

Steel

Aluminum

Driveshaft Material Guide: 7290 Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch	Up to 85.75 inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish.

Output type: Slip Yoke | Drive Type: 4WD / AWD | Trans. Make: GM | Category (P long) | U-Joint 3R

What material would you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 4WD / AWD X

Trans. Make: GM X

Trans. Model: 32 Spline / 1.875" Barrel X

U-joint Size: 3R X

Steel

Aluminum

Driveshaft Material Guide: 3R Series

Steel

Tube Diameter	Max Custom Length:
2.0 Inch	Up to 45 Inches - Center to Center of U-Joint
2.75 Inch	Up to 54 Inches - Center to Center of U-Joint
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 Inches - Center to Center of U-Joint
5.0 Inch	Up to 85.75 Inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish