Custom one piece driveshafts with slip yoke - Ford, Transmission 31/30 Spline, 1.688" Barrel
Custom One Piece Driveshaft Identifier.Click the buttons below to find your custom driveshaft. This is page 1 and you will pick your transmission or transfers case make, and then model. If you do not know your model you can select your spline count instead.
Contact us if you have any questions: |
U-Joint Size:
U-Joint Quick Reference Guide:
All Action Machine Inc. driveshafts are built with Premium Dana/Spicer, Non-Greasable U-joints
Outside Snap Ring U-joint |
|||
 
|
|||
| Series | Width | Cap Diameter | Max HP |
| 1310 | 3 - (3.219) | 1 - (1.063) | 500 |
| 1310 Ford | 3 - (3.219) | 1 - (1.125) | 500 |
| 1330 | 3 - (3.625) | 1 - (1.063) | 700 |
| 1330 Ford | 3 - (3.625) | 1 - (1.125) | 700 |
| 1350 | 3 - (3.625) | 1 - (1.188) | 1000 |
| Full Outside Snap Ring Measuring Guide | |||
What material you like your driveshaft made from?
Driveshaft Material Guide: 1310 / 1310 Ford Series
| Steel | |
|
|
|
| Tube Diameter | Max Custom Length: |
| 3.0 Inch | Up to 56 inches - Center to Center of U-Joint |
| 3.5 Inch | Up to 61 Inches - Center to Center of U-Joint |
| 4.0 Inch | Up to 68 Inches - Center to Center of U-Joint |
|
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price. |
|
| Aluminum | |
|
|
|
| Tube Diameter | Max Custom Length |
| 3.0 Inch | Up to 56 inches - Center to Center of U-Joint |
| 3.5 Inch | Up to 61 Inches - Center to Center of U-Joint |
| 4.0 Inch | Up to 72.5 Inches - Center to Center of U-Joint |
|
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish. |
|
What material you like your driveshaft made from?
Driveshaft Material Guide: 1330 / 1330 Ford Series
| Steel | |
|
|
|
| Tube Diameter | Max Custom Length: |
| 3.0 Inch | Up to 56 inches - Center to Center of U-Joint |
| 3.5 Inch | Up to 61 Inches - Center to Center of U-Joint |
| 4.0 Inch | Up to 68 Inches - Center to Center of U-Joint |
|
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price. |
|
| Aluminum | |
|
|
|
| Tube Diameter | Max Custom Length |
| 3.0 Inch | Up to 56 inches - Center to Center of U-Joint |
| 3.5 Inch | Up to 61 Inches - Center to Center of U-Joint |
| 4.0 Inch | Up to 72.5 Inches - Center to Center of U-Joint |
| 5.0 Inch | Up to 85.75 Inches - Center to Center of U-Joint |
|
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish. |
|
What material you like your driveshaft made from?
Driveshaft Material Guide: 1350 Series
| Steel | |
|
|
|
| Tube Diameter | Max Custom Length: |
| 3.0 Inch | Up to 56 inches - Center to Center of U-Joint |
| 3.5 Inch | Up to 61 Inches - Center to Center of U-Joint |
| 4.0 Inch | Up to 68 Inches - Center to Center of U-Joint |
|
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price. |
|
| Aluminum | |
|
|
|
| Tube Diameter | Max Custom Length |
| 3.0 Inch | Up to 56 inches - Center to Center of U-Joint |
| 3.5 Inch | Up to 61 Inches - Center to Center of U-Joint |
| 4.0 Inch | Up to 72.5 inches - Center to Center of U-Joint |
| 5.0 Inch | Up to 85.75 inches - Center to Center of U-Joint |
|
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish. |
|
If you do not see your vehicle option, contact us today for cataloging: CHAT Phone (574) 287-9650
