Free ground shipping on all driveshafts and orders over $100 within the continental USA! 

{"id":8287303008483,"title":"Duramax One Piece 5\" OD Aluminum Driveshaft - 1480 Upgrade Kit - XCLB","handle":"5a1480-m-xclb01-07-kit","description":"\u003ch3\u003e5 Inch OD Aluminum Driveshaft for Chevy\/GMC 2500\/3500,2001-2007, Duramax Diesel,ExtendedCab, LongBed 4WD,Transmission MW3 \u0026amp; Allison 1000\u003c\/h3\u003e\n\u003cp\u003eUpgrade your OEM 1410 Series two piece driveshaft to this heavy duty one piece 1480 series aluminum driveshaft.The driveshaft kit will includes all parts required for install including; driveshaft, slip yoke, 1480 Pinion Yoke, 1480 Strap Kit, and a pinion seal kit. \u003c\/p\u003e\n\n\u003ch3\u003eFREE GROUND SHIPPING INSIDE THE USA\u003cbr\u003e\u003cstrong\u003e(This productdoes not qualify for international shipping)\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli data-tab=\"tab-1\" class=\"current\"\u003eNotes\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eSpecs\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eVehicle Fitment\u003c\/li\u003e\n\u003cli data-tab=\"tab-4\"\u003eTubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"shopify-tab-content current\" id=\"tab-1\"\u003e\n\u003ch3\u003eHeavy Duty 5 Inch Aluminum Driveshaft \u003c\/h3\u003e\n\u003cp\u003eThis driveshaft fits 2001 to 2007Chevrolet\/GMC, Duramax, extendedcab, long bed, 4 wheel drive trucks with both manual and automatic transmissions. 2007 is a split year so check the specs or vehicle fitment tab for more info because model year 2007had two driveshaft designs. \u003c\/p\u003e\n\u003cp\u003eUse this driveshaft to upgrade and convert your factory 2 piece driveshaft into a heavy duty 1 piece.The OEM 2 pcdriveshafts are notorious for driveshaft vibrations and component failures. Countless customers complain of their OEM 2 pc shaft having repeated and expensive carrier bearing failures. Our Aluminum driveshaft eliminates the carrier bearing for a stronger, more reliable driveshaft. \u003c\/p\u003e\n\u003cp\u003eThis driveshaft is heavy duty from end to end. We use the Spicer cold forged sealed u-joint - the best and strongest 1480 u-joint available. The Aluminum tubing is 5 inch ODArconic premium aluminum seamless material that is 1\/8 inch thick -- rated for over 7,000 ft\/lbs of torque! It will handle even the heaviest towing loads.We offer a lifetime warranty on our welds and a one year unlimited mile warranty on all parts. \u003c\/p\u003e\n\u003cp\u003eThe driveshaft comes assembled with the transfer case slip yoke, balanced and ready to bolt in. You will need to remove the 1410 pinion yoke and install the provided 1480 pinion yoke. This kit includes new seals and a new 1480 strap kit. Once you have replaced the pinion yoke installation is as simple as sliding in the transfer case yoke and bolting up the rear u-joint. Be sure to check for clearance issues with the old carrier bearing mounting bracket. Many Duramax trucks require you to remove the carrier bearing bracket so that the new larger driveshaft does not rub. \u003c\/p\u003e\n\u003ch3\u003e\n You won't be disappointed with your 5 inch aluminum driveshaft. Time and again customers are impressed at how well made the driveshaft is and better yet, how it helps solve vibration and carrier bearing problems - no matter if it is a daily driver, over the road towing rig or pulling truck, aluminum is the way to go. \n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-2\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeld Yoke Material:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum 6061-T6 Forged Yoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTube Material:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.125 WALL 6061-T6 Seamless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTube Outside Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.0 Inch OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSpicer\/Dana \u003cbr\u003e1480 Series \u003ca title=\"U-Joint Measuring Guide\" href=\"https:\/\/actionmachineinc.myshopify.com\/pages\/finding-u-joint-series\" target=\"_blank\"\u003e(Measuring Guide - U-Joint)\u003cbr\u003e\u003c\/a\u003eU-Joint Size: 1 3\/8\" Cap x 4 3\/16\" Span \u003cbr\u003ePremium Non-Greasable \u003c\/p\u003e\n\u003cp\u003eThis complete driveshaft kit is an upgrade from the OEM 1410 series driveshaft. The kit will includes all parts requiredfor install including driveshaft, slip yoke, 1480 PinionYoke, 1480 Strap Kit, and a pinion seal kit. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriveshaftLength:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd title=\"Over all driveshaft measurements to be taken from the center of u-joint on one end to the center of u-joint on the opposite end.\"\u003e79Inches -Seal to Center of U-Joint\u003cbr\u003e\n\u003ca href=\"https:\/\/actionmachineinc.myshopify.com\/pages\/driveshaft-measuring-guide-form-1-piece\" title=\"Driveshaft Length Measuring Guide\" target=\"_blank\"\u003e(Measuring Guide - Driveshaft Length)\u003cbr\u003e\u003c\/a\u003eSee note below for modified vehicles.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNote for 2007 Trucks:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd title=\"Over all driveshaft measurements to be taken from the center of u-joint on one end to the center of u-joint on the opposite end.\"\u003e2007 is a split year with two truck designs. This driveshaft fits 2007 model year trucks with the classic design (creased door skin).If you have a 2007 with the new style body design(smooth door skin) then this will be your driveshaft: \u003ca title='5A1480-M-XCLB(07-19) Duramax One Piece 5\" OD Aluminum Driveshaft' href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/5a1480-xclb?variant=32594715508871\"\u003e5A1480-M-XCLB(07-19)\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"Driveshaft Measuring Guide\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Driveshaft_Length_slip-ujoint_480x480.png?v=1603981600\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-3\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMODEL\u003c\/th\u003e\n\u003cth\u003eMAKE\u003c\/th\u003e\n\u003cth\u003eFITMENT NOTES\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevy\u003c\/td\u003e\n\u003ctd\u003eSilverado2500\u003c\/td\u003e\n\u003ctd\u003eExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevy\u003c\/td\u003e\n\u003ctd\u003eSilverado3500\u003c\/td\u003e\n\u003ctd\u003eExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500 \u003c\/td\u003e\n\u003ctd\u003eExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC \u003c\/td\u003e\n\u003ctd\u003eSierra3500 \u003c\/td\u003e\n\u003ctd\u003eExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd bgcolor=\"#e0e0e0\"\u003e\n\u003cstrong\u003eYears\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2001, 2002, 2003, 2004, 2005, 2006, 2007 with the classic design (creased door skin). If you would like the stock 1410 Series aluminum driveshaft find it here: \u003ca title='5A1410-M-XCLB(01-07) Duramax One Piece 5\" OD Aluminum Driveshaft' href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/5a1410-m-xclb?variant=32594217894023\"\u003e5A1410-M-XCLB(01-07)\u003c\/a\u003e. If 2007 with new style body design(smooth door skin) this will be your driveshaft: \u003ca title=\"5A1480-M-XCLB(07-19)\" href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/5a1480-xclb?variant=32594715508871\"\u003e5A1480-M-XCLB(07-19)\u003c\/a\u003e.\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd bgcolor=\"#e0e0e0\"\u003e\u003cstrong\u003eTransmission\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4WD (fits both automatic or manual) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd bgcolor=\"#e0e0e0\"\u003e\u003cstrong\u003eTrans Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n Duramax Diesel, Manual MW3, Automatic Allison 1000 MW7\u0026amp; Automatic Allison 1000 M74 (If you have the Manual ZF this will be your driveshaft: \u003ca title='Duramax One Piece 5\" OD Aluminum Driveshaft for the Manual ZF' href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/copy-of-aluminum-driveshaft-5-od-2001-07-chevy-gmc-duramax-extended-cab-long-bed-4wd\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/copy-of-aluminum-driveshaft-5-od-2001-07-chevy-gmc-duramax-extended-cab-long-bed-4wd\"\u003e5A1480-XCLB(01-06)\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd bgcolor=\"#e0e0e0\"\u003e\u003cstrong\u003eWheel Base\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e157.5 Inch \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-4\"\u003e \u003ch3\u003eQuality Aluminum Tubing vs. Thin wall Swedged Tubing\u003c\/h3\u003e\n \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2024-04-11_at_2.25.38_PM.png?v=1712859999\" alt=\"\"\u003e\u003c\/p\u003e\n \u003ctable style=\"width: 100%;\" width=\"100%\"\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd style=\"width: 50%;\"\u003e\n\u003cstrong\u003eAction Machine Inc.:\u003c\/strong\u003e\u003cbr\u003eHeavy Duty Tubing\u003c\/td\u003e\n \u003ctd style=\"width: 50%;\"\u003e\n\u003cstrong\u003eThe Others:\u003c\/strong\u003e\u003cbr\u003eThin Wall Swedged Tubing\u003cbr\u003e\n\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n \u003c\/table\u003e\n \u003chr\u003e\n \u003cp\u003eThe Action Machine driveshaft is a heavy-duty driveshaft made to last. You will find cheaper aluminum driveshafts on the internet but that is what they are – cheaper in price and quality. \u003c\/p\u003e \n \u003cp\u003e\u003cimg alt=\"AMI aluminum vs Swedged driveshaft\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2024-04-12_at_3.25.26_PM.png?v=1712949983\"\u003e\u003c\/p\u003e\n \u003cp\u003e\n When you see other aluminum driveshafts with tubing that is bigger in the middle and smaller at the ends, that is a thin wall 0.075 inch aluminum which is light duty OEM material. Our 1\/8 inch thick heavy duty Arconic brand tube is made with an even wall thickness and extra straight from end to end to run vibration free and for incredible torque performance. Some driveshafts with cheaper prices have conversion u-joints that step from one u-joint size to another or greaseable u-joints. Conversion and greaseable u-joints are not as strong as the cold forged solid cross u-joints that we use and have more play. Many of the cheaper shafts have cast weld yokes at each end while ours are USA made forged weld yokes. In fact, every part of our driveshaft from end to end is USA made premium product – assembled, welded and balanced by our team here in Indiana. You can’t compare the quality, durability and life you will get from our driveshaft to other lower cost driveshafts out there.\u003c\/p\u003e\n \u003chr\u003e\n \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2024-04-11_at_1.38.19_PM.png?v=1712858130\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\n\n\u003cp\u003eThis drive shaft includes the slip yoke, 1480 pinion yoke, strap kit, seals and it is balanced and ready to install.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eModified Vehicles:\u003c\/b\u003e\u003cbr\u003e This driveshaft is designed to fit stock vehicle applications, double check your driveshaft length if your truck is lifted, leveled or modified. We maybe able to make you a custom driveshaft to match your unique vehicle specifications - contact us today with your driveshaft length (\u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/one-piece-driveshaft-option-one-seal-boot\" title=\"One Piece Driveshaft - Measuring Guide\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/pages\/one-piece-driveshaft-option-one-seal-boot\"\u003emeasuring guide\u003c\/a\u003e). The maximum lengthdriveshaft that AMI can build is89 inches seal tocenter of u-joint. \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions we are here to help:\u003cbr\u003e\u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003eCHAT\u003c\/a\u003e| PHONE\u003ca href=\"tel:574-287-9650\"\u003e(574)287-9650\u003c\/a\u003e| \u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" title=\"Contact Information for Action Machine Inc.\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\"\u003eCONTACT US\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFREE GROUND SHIPPING INSIDE THE USA\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(This productdoes not qualify for international shipping)\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e","published_at":"2024-02-08T13:01:31-05:00","created_at":"2024-02-08T13:01:32-05:00","vendor":"Action Machine Inc.","type":"Driveshaft","tags":["5A1480-XCLB","5A1480MXCLB","Brand_Action Machine Inc.","bullet 7_Extended Cab \u0026 Long Bed","bullet 8_Transmission: 4WD | MW3 \/ Allison 1000","bullet model_2500\/3500","bullet series_1480","bullet tube dia_5\" OD","bullet vehicle_Chevy\/GMC","bullet year_2001 - 2007","Cab\/Bed_Extended Cab \u0026 8 ft Bed","Delay_3 Weeks","Drive Type_4WD","driveshaft type_OEM Driveshaft Upgrade","Material_Aluminum","Part_Driveshaft","Transmission_Automatic","Transmission_Manual","Tube Outside Diameter_5.0\" OD","U-Joint Series_1480","U-Joint Size_1 3\/8\" Cap x 4 3\/16\" Span","Vehicle Make_Sierra 2500","Vehicle Make_Sierra 3500","Vehicle Make_Silverado 2500","Vehicle Make_Silverado 3500","Vehicle_Chevy","Vehicle_GMC","Wheel Base_157.5\"","Year_2001","Year_2002","Year_2003","Year_2004","Year_2005","Year_2006","Year_2007 (creased door skin)"],"price":106631,"price_min":106631,"price_max":106631,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44377422725347,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5A1480-M-XCLB(01-07)-Kit","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Duramax One Piece 5\" OD Aluminum Driveshaft - 1480 Upgrade Kit - XCLB","public_title":null,"options":["Default Title"],"price":106631,"weight":15876,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2024-02-01at10.54.08AM_19a10fec-304e-4e60-b97f-afb549f5efcb.png?v=1707415303","\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-09at1.15.50PM_4eed5106-d987-4c40-852b-de6905d56125.png?v=1707415303","\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-09at1.13.53PM_68c540e3-c2b0-40fb-9a57-19cfb6872acb.png?v=1707415303","\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-05at9.28.55AM_75bdca98-a744-4ced-bbc4-92bfb8b30ccc.png?v=1707415304","\/\/www.actionmachineinc.com\/cdn\/shop\/files\/sticker.sm_1c9d7bcc-3652-4423-8920-5897c32e5022.jpg?v=1707415304"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2024-02-01at10.54.08AM_19a10fec-304e-4e60-b97f-afb549f5efcb.png?v=1707415303","options":["Title"],"media":[{"alt":null,"id":33410469167331,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1908,"width":1908,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2024-02-01at10.54.08AM_19a10fec-304e-4e60-b97f-afb549f5efcb.png?v=1707415303"},"aspect_ratio":1.0,"height":1908,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2024-02-01at10.54.08AM_19a10fec-304e-4e60-b97f-afb549f5efcb.png?v=1707415303","width":1908},{"alt":null,"id":33410469265635,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2314,"width":2314,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-09at1.15.50PM_4eed5106-d987-4c40-852b-de6905d56125.png?v=1707415303"},"aspect_ratio":1.0,"height":2314,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-09at1.15.50PM_4eed5106-d987-4c40-852b-de6905d56125.png?v=1707415303","width":2314},{"alt":null,"id":33410469331171,"position":3,"preview_image":{"aspect_ratio":1.003,"height":2306,"width":2312,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-09at1.13.53PM_68c540e3-c2b0-40fb-9a57-19cfb6872acb.png?v=1707415303"},"aspect_ratio":1.003,"height":2306,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-09at1.13.53PM_68c540e3-c2b0-40fb-9a57-19cfb6872acb.png?v=1707415303","width":2312},{"alt":null,"id":33410469363939,"position":4,"preview_image":{"aspect_ratio":1.002,"height":2300,"width":2304,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-05at9.28.55AM_75bdca98-a744-4ced-bbc4-92bfb8b30ccc.png?v=1707415304"},"aspect_ratio":1.002,"height":2300,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/ScreenShot2022-12-05at9.28.55AM_75bdca98-a744-4ced-bbc4-92bfb8b30ccc.png?v=1707415304","width":2304},{"alt":null,"id":33410469429475,"position":5,"preview_image":{"aspect_ratio":1.861,"height":1500,"width":2791,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/sticker.sm_1c9d7bcc-3652-4423-8920-5897c32e5022.jpg?v=1707415304"},"aspect_ratio":1.861,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/files\/sticker.sm_1c9d7bcc-3652-4423-8920-5897c32e5022.jpg?v=1707415304","width":2791}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e5 Inch OD Aluminum Driveshaft for Chevy\/GMC 2500\/3500,2001-2007, Duramax Diesel,ExtendedCab, LongBed 4WD,Transmission MW3 \u0026amp; Allison 1000\u003c\/h3\u003e\n\u003cp\u003eUpgrade your OEM 1410 Series two piece driveshaft to this heavy duty one piece 1480 series aluminum driveshaft.The driveshaft kit will includes all parts required for install including; driveshaft, slip yoke, 1480 Pinion Yoke, 1480 Strap Kit, and a pinion seal kit. \u003c\/p\u003e\n\n\u003ch3\u003eFREE GROUND SHIPPING INSIDE THE USA\u003cbr\u003e\u003cstrong\u003e(This productdoes not qualify for international shipping)\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli data-tab=\"tab-1\" class=\"current\"\u003eNotes\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eSpecs\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eVehicle Fitment\u003c\/li\u003e\n\u003cli data-tab=\"tab-4\"\u003eTubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"shopify-tab-content current\" id=\"tab-1\"\u003e\n\u003ch3\u003eHeavy Duty 5 Inch Aluminum Driveshaft \u003c\/h3\u003e\n\u003cp\u003eThis driveshaft fits 2001 to 2007Chevrolet\/GMC, Duramax, extendedcab, long bed, 4 wheel drive trucks with both manual and automatic transmissions. 2007 is a split year so check the specs or vehicle fitment tab for more info because model year 2007had two driveshaft designs. \u003c\/p\u003e\n\u003cp\u003eUse this driveshaft to upgrade and convert your factory 2 piece driveshaft into a heavy duty 1 piece.The OEM 2 pcdriveshafts are notorious for driveshaft vibrations and component failures. Countless customers complain of their OEM 2 pc shaft having repeated and expensive carrier bearing failures. Our Aluminum driveshaft eliminates the carrier bearing for a stronger, more reliable driveshaft. \u003c\/p\u003e\n\u003cp\u003eThis driveshaft is heavy duty from end to end. We use the Spicer cold forged sealed u-joint - the best and strongest 1480 u-joint available. The Aluminum tubing is 5 inch ODArconic premium aluminum seamless material that is 1\/8 inch thick -- rated for over 7,000 ft\/lbs of torque! It will handle even the heaviest towing loads.We offer a lifetime warranty on our welds and a one year unlimited mile warranty on all parts. \u003c\/p\u003e\n\u003cp\u003eThe driveshaft comes assembled with the transfer case slip yoke, balanced and ready to bolt in. You will need to remove the 1410 pinion yoke and install the provided 1480 pinion yoke. This kit includes new seals and a new 1480 strap kit. Once you have replaced the pinion yoke installation is as simple as sliding in the transfer case yoke and bolting up the rear u-joint. Be sure to check for clearance issues with the old carrier bearing mounting bracket. Many Duramax trucks require you to remove the carrier bearing bracket so that the new larger driveshaft does not rub. \u003c\/p\u003e\n\u003ch3\u003e\n You won't be disappointed with your 5 inch aluminum driveshaft. Time and again customers are impressed at how well made the driveshaft is and better yet, how it helps solve vibration and carrier bearing problems - no matter if it is a daily driver, over the road towing rig or pulling truck, aluminum is the way to go. \n\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-2\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeld Yoke Material:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum 6061-T6 Forged Yoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTube Material:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.125 WALL 6061-T6 Seamless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTube Outside Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.0 Inch OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSpicer\/Dana \u003cbr\u003e1480 Series \u003ca title=\"U-Joint Measuring Guide\" href=\"https:\/\/actionmachineinc.myshopify.com\/pages\/finding-u-joint-series\" target=\"_blank\"\u003e(Measuring Guide - U-Joint)\u003cbr\u003e\u003c\/a\u003eU-Joint Size: 1 3\/8\" Cap x 4 3\/16\" Span \u003cbr\u003ePremium Non-Greasable \u003c\/p\u003e\n\u003cp\u003eThis complete driveshaft kit is an upgrade from the OEM 1410 series driveshaft. The kit will includes all parts requiredfor install including driveshaft, slip yoke, 1480 PinionYoke, 1480 Strap Kit, and a pinion seal kit. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDriveshaftLength:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd title=\"Over all driveshaft measurements to be taken from the center of u-joint on one end to the center of u-joint on the opposite end.\"\u003e79Inches -Seal to Center of U-Joint\u003cbr\u003e\n\u003ca href=\"https:\/\/actionmachineinc.myshopify.com\/pages\/driveshaft-measuring-guide-form-1-piece\" title=\"Driveshaft Length Measuring Guide\" target=\"_blank\"\u003e(Measuring Guide - Driveshaft Length)\u003cbr\u003e\u003c\/a\u003eSee note below for modified vehicles.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNote for 2007 Trucks:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd title=\"Over all driveshaft measurements to be taken from the center of u-joint on one end to the center of u-joint on the opposite end.\"\u003e2007 is a split year with two truck designs. This driveshaft fits 2007 model year trucks with the classic design (creased door skin).If you have a 2007 with the new style body design(smooth door skin) then this will be your driveshaft: \u003ca title='5A1480-M-XCLB(07-19) Duramax One Piece 5\" OD Aluminum Driveshaft' href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/5a1480-xclb?variant=32594715508871\"\u003e5A1480-M-XCLB(07-19)\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"Driveshaft Measuring Guide\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Driveshaft_Length_slip-ujoint_480x480.png?v=1603981600\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-3\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMODEL\u003c\/th\u003e\n\u003cth\u003eMAKE\u003c\/th\u003e\n\u003cth\u003eFITMENT NOTES\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevy\u003c\/td\u003e\n\u003ctd\u003eSilverado2500\u003c\/td\u003e\n\u003ctd\u003eExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevy\u003c\/td\u003e\n\u003ctd\u003eSilverado3500\u003c\/td\u003e\n\u003ctd\u003eExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500 \u003c\/td\u003e\n\u003ctd\u003eExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC \u003c\/td\u003e\n\u003ctd\u003eSierra3500 \u003c\/td\u003e\n\u003ctd\u003eExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd bgcolor=\"#e0e0e0\"\u003e\n\u003cstrong\u003eYears\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e2001, 2002, 2003, 2004, 2005, 2006, 2007 with the classic design (creased door skin). If you would like the stock 1410 Series aluminum driveshaft find it here: \u003ca title='5A1410-M-XCLB(01-07) Duramax One Piece 5\" OD Aluminum Driveshaft' href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/5a1410-m-xclb?variant=32594217894023\"\u003e5A1410-M-XCLB(01-07)\u003c\/a\u003e. If 2007 with new style body design(smooth door skin) this will be your driveshaft: \u003ca title=\"5A1480-M-XCLB(07-19)\" href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/5a1480-xclb?variant=32594715508871\"\u003e5A1480-M-XCLB(07-19)\u003c\/a\u003e.\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd bgcolor=\"#e0e0e0\"\u003e\u003cstrong\u003eTransmission\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4WD (fits both automatic or manual) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd bgcolor=\"#e0e0e0\"\u003e\u003cstrong\u003eTrans Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n Duramax Diesel, Manual MW3, Automatic Allison 1000 MW7\u0026amp; Automatic Allison 1000 M74 (If you have the Manual ZF this will be your driveshaft: \u003ca title='Duramax One Piece 5\" OD Aluminum Driveshaft for the Manual ZF' href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/copy-of-aluminum-driveshaft-5-od-2001-07-chevy-gmc-duramax-extended-cab-long-bed-4wd\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/collections\/one-piece-custom-driveshafts\/products\/copy-of-aluminum-driveshaft-5-od-2001-07-chevy-gmc-duramax-extended-cab-long-bed-4wd\"\u003e5A1480-XCLB(01-06)\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd bgcolor=\"#e0e0e0\"\u003e\u003cstrong\u003eWheel Base\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e157.5 Inch \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-4\"\u003e \u003ch3\u003eQuality Aluminum Tubing vs. Thin wall Swedged Tubing\u003c\/h3\u003e\n \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2024-04-11_at_2.25.38_PM.png?v=1712859999\" alt=\"\"\u003e\u003c\/p\u003e\n \u003ctable style=\"width: 100%;\" width=\"100%\"\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd style=\"width: 50%;\"\u003e\n\u003cstrong\u003eAction Machine Inc.:\u003c\/strong\u003e\u003cbr\u003eHeavy Duty Tubing\u003c\/td\u003e\n \u003ctd style=\"width: 50%;\"\u003e\n\u003cstrong\u003eThe Others:\u003c\/strong\u003e\u003cbr\u003eThin Wall Swedged Tubing\u003cbr\u003e\n\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n \u003c\/table\u003e\n \u003chr\u003e\n \u003cp\u003eThe Action Machine driveshaft is a heavy-duty driveshaft made to last. You will find cheaper aluminum driveshafts on the internet but that is what they are – cheaper in price and quality. \u003c\/p\u003e \n \u003cp\u003e\u003cimg alt=\"AMI aluminum vs Swedged driveshaft\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2024-04-12_at_3.25.26_PM.png?v=1712949983\"\u003e\u003c\/p\u003e\n \u003cp\u003e\n When you see other aluminum driveshafts with tubing that is bigger in the middle and smaller at the ends, that is a thin wall 0.075 inch aluminum which is light duty OEM material. Our 1\/8 inch thick heavy duty Arconic brand tube is made with an even wall thickness and extra straight from end to end to run vibration free and for incredible torque performance. Some driveshafts with cheaper prices have conversion u-joints that step from one u-joint size to another or greaseable u-joints. Conversion and greaseable u-joints are not as strong as the cold forged solid cross u-joints that we use and have more play. Many of the cheaper shafts have cast weld yokes at each end while ours are USA made forged weld yokes. In fact, every part of our driveshaft from end to end is USA made premium product – assembled, welded and balanced by our team here in Indiana. You can’t compare the quality, durability and life you will get from our driveshaft to other lower cost driveshafts out there.\u003c\/p\u003e\n \u003chr\u003e\n \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2024-04-11_at_1.38.19_PM.png?v=1712858130\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\n\n\u003cp\u003eThis drive shaft includes the slip yoke, 1480 pinion yoke, strap kit, seals and it is balanced and ready to install.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eModified Vehicles:\u003c\/b\u003e\u003cbr\u003e This driveshaft is designed to fit stock vehicle applications, double check your driveshaft length if your truck is lifted, leveled or modified. We maybe able to make you a custom driveshaft to match your unique vehicle specifications - contact us today with your driveshaft length (\u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/one-piece-driveshaft-option-one-seal-boot\" title=\"One Piece Driveshaft - Measuring Guide\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/pages\/one-piece-driveshaft-option-one-seal-boot\"\u003emeasuring guide\u003c\/a\u003e). The maximum lengthdriveshaft that AMI can build is89 inches seal tocenter of u-joint. \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions we are here to help:\u003cbr\u003e\u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003eCHAT\u003c\/a\u003e| PHONE\u003ca href=\"tel:574-287-9650\"\u003e(574)287-9650\u003c\/a\u003e| \u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" title=\"Contact Information for Action Machine Inc.\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\"\u003eCONTACT US\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFREE GROUND SHIPPING INSIDE THE USA\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(This productdoes not qualify for international shipping)\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e"}

Duramax One Piece 5" OD Aluminum Driveshaft - 1480 Upgrade Kit - XCLB

Vendor: Action Machine Inc., Sku: 5A1480-M-XCLB(01-07)-Kit

Product Description

5 Inch OD Aluminum Driveshaft for Chevy/GMC 2500/3500,2001-2007, Duramax Diesel,ExtendedCab, LongBed 4WD,Transmission MW3 & Allison 1000

Upgrade your OEM 1410 Series two piece driveshaft to this heavy duty one piece 1480 series aluminum driveshaft.The driveshaft kit will includes all parts required for install including; driveshaft, slip yoke, 1480 Pinion Yoke, 1480 Strap Kit, and a pinion seal kit.

FREE GROUND SHIPPING INSIDE THE USA
(This productdoes not qualify for international shipping)

  • Notes
  • Specs
  • Vehicle Fitment
  • Tubing

Heavy Duty 5 Inch Aluminum Driveshaft

This driveshaft fits 2001 to 2007Chevrolet/GMC, Duramax, extendedcab, long bed, 4 wheel drive trucks with both manual and automatic transmissions. 2007 is a split year so check the specs or vehicle fitment tab for more info because model year 2007had two driveshaft designs.

Use this driveshaft to upgrade and convert your factory 2 piece driveshaft into a heavy duty 1 piece.The OEM 2 pcdriveshafts are notorious for driveshaft vibrations and component failures. Countless customers complain of their OEM 2 pc shaft having repeated and expensive carrier bearing failures. Our Aluminum driveshaft eliminates the carrier bearing for a stronger, more reliable driveshaft.

This driveshaft is heavy duty from end to end. We use the Spicer cold forged sealed u-joint - the best and strongest 1480 u-joint available. The Aluminum tubing is 5 inch ODArconic premium aluminum seamless material that is 1/8 inch thick -- rated for over 7,000 ft/lbs of torque! It will handle even the heaviest towing loads.We offer a lifetime warranty on our welds and a one year unlimited mile warranty on all parts.

The driveshaft comes assembled with the transfer case slip yoke, balanced and ready to bolt in. You will need to remove the 1410 pinion yoke and install the provided 1480 pinion yoke. This kit includes new seals and a new 1480 strap kit. Once you have replaced the pinion yoke installation is as simple as sliding in the transfer case yoke and bolting up the rear u-joint. Be sure to check for clearance issues with the old carrier bearing mounting bracket. Many Duramax trucks require you to remove the carrier bearing bracket so that the new larger driveshaft does not rub.

You won't be disappointed with your 5 inch aluminum driveshaft. Time and again customers are impressed at how well made the driveshaft is and better yet, how it helps solve vibration and carrier bearing problems - no matter if it is a daily driver, over the road towing rig or pulling truck, aluminum is the way to go.

Weld Yoke Material: Aluminum 6061-T6 Forged Yoke
Tube Material: 0.125 WALL 6061-T6 Seamless
Tube Outside Diameter: 5.0 Inch OD
U-Joint:

Spicer/Dana
1480 Series (Measuring Guide - U-Joint)
U-Joint Size: 1 3/8" Cap x 4 3/16" Span
Premium Non-Greasable

This complete driveshaft kit is an upgrade from the OEM 1410 series driveshaft. The kit will includes all parts requiredfor install including driveshaft, slip yoke, 1480 PinionYoke, 1480 Strap Kit, and a pinion seal kit.

DriveshaftLength: 79Inches -Seal to Center of U-Joint
(Measuring Guide - Driveshaft Length)
See note below for modified vehicles.
Note for 2007 Trucks: 2007 is a split year with two truck designs. This driveshaft fits 2007 model year trucks with the classic design (creased door skin).If you have a 2007 with the new style body design(smooth door skin) then this will be your driveshaft: 5A1480-M-XCLB(07-19)

Driveshaft Measuring Guide

MODEL MAKE FITMENT NOTES
Chevy Silverado2500 ExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD
Chevy Silverado3500 ExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD
GMC Sierra 2500 ExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD
GMC Sierra3500 ExtendedCab, Long Bed (8 ft), Duramax Diesel, 4WD

Years 2001, 2002, 2003, 2004, 2005, 2006, 2007 with the classic design (creased door skin). If you would like the stock 1410 Series aluminum driveshaft find it here: 5A1410-M-XCLB(01-07). If 2007 with new style body design(smooth door skin) this will be your driveshaft: 5A1480-M-XCLB(07-19).
Transmission 4WD (fits both automatic or manual)
Trans Code Duramax Diesel, Manual MW3, Automatic Allison 1000 MW7& Automatic Allison 1000 M74 (If you have the Manual ZF this will be your driveshaft: 5A1480-XCLB(01-06)
Wheel Base 157.5 Inch


Quality Aluminum Tubing vs. Thin wall Swedged Tubing

Action Machine Inc.:
Heavy Duty Tubing
The Others:
Thin Wall Swedged Tubing

The Action Machine driveshaft is a heavy-duty driveshaft made to last. You will find cheaper aluminum driveshafts on the internet but that is what they are – cheaper in price and quality.

AMI aluminum vs Swedged driveshaft

When you see other aluminum driveshafts with tubing that is bigger in the middle and smaller at the ends, that is a thin wall 0.075 inch aluminum which is light duty OEM material. Our 1/8 inch thick heavy duty Arconic brand tube is made with an even wall thickness and extra straight from end to end to run vibration free and for incredible torque performance. Some driveshafts with cheaper prices have conversion u-joints that step from one u-joint size to another or greaseable u-joints. Conversion and greaseable u-joints are not as strong as the cold forged solid cross u-joints that we use and have more play. Many of the cheaper shafts have cast weld yokes at each end while ours are USA made forged weld yokes. In fact, every part of our driveshaft from end to end is USA made premium product – assembled, welded and balanced by our team here in Indiana. You can’t compare the quality, durability and life you will get from our driveshaft to other lower cost driveshafts out there.


This drive shaft includes the slip yoke, 1480 pinion yoke, strap kit, seals and it is balanced and ready to install.

Modified Vehicles:
This driveshaft is designed to fit stock vehicle applications, double check your driveshaft length if your truck is lifted, leveled or modified. We maybe able to make you a custom driveshaft to match your unique vehicle specifications - contact us today with your driveshaft length (measuring guide). The maximum lengthdriveshaft that AMI can build is89 inches seal tocenter of u-joint.


If you have any questions we are here to help:
CHAT| PHONE(574)287-9650| CONTACT US


FREE GROUND SHIPPING INSIDE THE USA
(This productdoes not qualify for international shipping)


Sku: 5A1480-M-XCLB(01-07)-Kit

Ship Time:

All driveshafts are custom built to your specification. Current lead time is 3 weeks from time of order.

$1,066.31
Maximum quantity available reached.
.

Customer Reviews

Based on 1 review Write a review

Related Products