Free ground shipping on all driveshafts and orders over $100 within the continental USA! 

{"id":22626861061,"title":"Neapco N20WYS44-2A End Yoke","handle":"n20wys44-2a","description":"\u003ch1\u003eDrive Shaft End Yoke\u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1a\"\u003e \u003clabel for=\"tab1a\"\u003eNotes\u003c\/label\u003e \u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab2a\"\u003e \u003clabel for=\"tab2a\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3a\"\u003e \u003clabel for=\"tab3a\"\u003eApplications\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cb\u003eThe differential end yoke \/ pinion yoke transfers the power from the driveshaft to the pinion through a u-joint at the end of the driveshaft. This allows the driveshaft to spin while the rear differential travels up and down with the suspension. \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003et\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003c!-- * 2 * --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\u003cem\u003e\u003cem\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/em\u003e\u003c\/em\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eU-Joint Series:\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eRPL 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eStyle:\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eWing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cb\u003eCap Measurement:\u003c\/b\u003e\u003cbr\u003e\u003cem\u003e- Bolt Hole Center Line to Center Line\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e2.81 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eU-Joint Width:\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e- Bearing Hole to Hole\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e5.30 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cb\u003eEnd Yoke Length(C) :\u003c\/b\u003e\u003cbr\u003e\u003ci\u003e- Center Line to End of Spline\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e5.090 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eHub Diameter (D):\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e3.750 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cb\u003eSpline Diameter (E):\u003c\/b\u003e\u003cbr\u003e\u003ci\u003e- From Farthest Point to Farthest Point\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e2.750 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eNumber of Splines (F):\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eBore Length (G):\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e3.000 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003eVMRS: 024001003\u003c\/em\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- * 3 * --\u003e\n\u003csection\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Driveshaft Slip Yoke.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\n\u003cbr\u003eApplications\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- * 4 * --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1a {\n display: none;\n}\n#tab2a {\n display: none;\n}\n#tab3a {\n display: none;\n}\n#tab4a {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #DE330E;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1a:checked ~ #content1,\n#tab2a:checked ~ #content2,\n#tab3a:checked ~ #content3,\n#tab4a:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eThis part is compatible with: \u003c\/strong\u003e\u003ca title=\"Universal Joint Strap Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/3570-20?variant=37528875106455\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3570-20?variant=37528875106455\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNeapco \u003c\/span\u003e\u003ca title=\"Neapco 6-0020 U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/collections\/parts\/products\/6-0020?variant=42414814658787\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/collections\/parts\/products\/6-0020?variant=42414814658787\"\u003e6-0020\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e U-Joint\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cb\u003eAlternate Part Options:\u003cbr\u003e\u003c\/b\u003e\u003cmeta charset=\"utf-8\"\u003eSpicer 35-20WYS442A End Yoke\u003cbr\u003eMeritor 20WYS44 2A \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEnd Yoke\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eFor assistance measuring your end yoke\/pinion yoke you can use our: \u003cbr\u003e\u003ca title=\"End Yoke Measuring Guide\" href=\"https:\/\/www.actionmachineinc.com\/pages\/how-to-measure-an-inside-snap-ring-style-end-yoke\"\u003eEnd Yoke Measuring Guide\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions we are here to help: \u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003e CHAT\u003c\/a\u003e | \u003cmeta charset=\"utf-8\"\u003e\n\u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" title=\"Contact Information for Action Machine Inc.\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e | (574)287-9650\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-05-30T08:15:58-04:00","created_at":"2017-11-03T08:44:58-04:00","vendor":"Neapco","type":"End Yoke","tags":["Bearing Cap CL to CL_2.81\"","Bearing Cap Diameter_2.81\"","Bore Length_3.000”","Brand_Neapco","CL to End_5.090”","End Yoke Type_Rear End Yoke","Hub Diameter_3.750”","Lock Up_5.30\"","N20WYS442A","Part_End Yoke","Part_Yoke","RPL20","Series_RPL 20","Snap Ring to Snap Ring_7.547\"","Spline OD_2.750”","Spline_10","Style_Wing","U-Joint Type_Wing","Yoke_End Yoke"],"price":61676,"price_min":61676,"price_max":61676,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":205583220741,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N20WYS44-2A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco N20WYS44-2A End Yoke","public_title":null,"options":["Default Title"],"price":61676,"weight":2268,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"00083869379081","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/N20WYS44-2A.jpg?v=1509713165"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/N20WYS44-2A.jpg?v=1509713165","options":["Title"],"media":[{"alt":null,"id":2426481475719,"position":1,"preview_image":{"aspect_ratio":1.0,"height":220,"width":220,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/N20WYS44-2A.jpg?v=1509713165"},"aspect_ratio":1.0,"height":220,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/N20WYS44-2A.jpg?v=1509713165","width":220}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eDrive Shaft End Yoke\u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1a\"\u003e \u003clabel for=\"tab1a\"\u003eNotes\u003c\/label\u003e \u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab2a\"\u003e \u003clabel for=\"tab2a\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3a\"\u003e \u003clabel for=\"tab3a\"\u003eApplications\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cb\u003eThe differential end yoke \/ pinion yoke transfers the power from the driveshaft to the pinion through a u-joint at the end of the driveshaft. This allows the driveshaft to spin while the rear differential travels up and down with the suspension. \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003et\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003c!-- * 2 * --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\u003cem\u003e\u003cem\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/em\u003e\u003c\/em\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eU-Joint Series:\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eRPL 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eStyle:\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eWing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cb\u003eCap Measurement:\u003c\/b\u003e\u003cbr\u003e\u003cem\u003e- Bolt Hole Center Line to Center Line\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e2.81 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eU-Joint Width:\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e- Bearing Hole to Hole\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e5.30 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cb\u003eEnd Yoke Length(C) :\u003c\/b\u003e\u003cbr\u003e\u003ci\u003e- Center Line to End of Spline\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e5.090 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eHub Diameter (D):\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e3.750 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cb\u003eSpline Diameter (E):\u003c\/b\u003e\u003cbr\u003e\u003ci\u003e- From Farthest Point to Farthest Point\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e2.750 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eNumber of Splines (F):\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cb\u003eBore Length (G):\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e3.000 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003eVMRS: 024001003\u003c\/em\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- * 3 * --\u003e\n\u003csection\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Driveshaft Slip Yoke.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\n\u003cbr\u003eApplications\u003c\/h3\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- * 4 * --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1a {\n display: none;\n}\n#tab2a {\n display: none;\n}\n#tab3a {\n display: none;\n}\n#tab4a {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #DE330E;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1a:checked ~ #content1,\n#tab2a:checked ~ #content2,\n#tab3a:checked ~ #content3,\n#tab4a:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eThis part is compatible with: \u003c\/strong\u003e\u003ca title=\"Universal Joint Strap Kit\" href=\"https:\/\/www.actionmachineinc.com\/products\/3570-20?variant=37528875106455\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/3570-20?variant=37528875106455\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNeapco \u003c\/span\u003e\u003ca title=\"Neapco 6-0020 U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/collections\/parts\/products\/6-0020?variant=42414814658787\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/collections\/parts\/products\/6-0020?variant=42414814658787\"\u003e6-0020\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e U-Joint\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cb\u003eAlternate Part Options:\u003cbr\u003e\u003c\/b\u003e\u003cmeta charset=\"utf-8\"\u003eSpicer 35-20WYS442A End Yoke\u003cbr\u003eMeritor 20WYS44 2A \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEnd Yoke\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eFor assistance measuring your end yoke\/pinion yoke you can use our: \u003cbr\u003e\u003ca title=\"End Yoke Measuring Guide\" href=\"https:\/\/www.actionmachineinc.com\/pages\/how-to-measure-an-inside-snap-ring-style-end-yoke\"\u003eEnd Yoke Measuring Guide\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions we are here to help: \u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003e CHAT\u003c\/a\u003e | \u003cmeta charset=\"utf-8\"\u003e\n\u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" title=\"Contact Information for Action Machine Inc.\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e | (574)287-9650\u003c\/strong\u003e\u003c\/p\u003e"}

Neapco N20WYS44-2A End Yoke

Vendor: Neapco, Sku: N20WYS44-2A

Product Description

Drive Shaft End Yoke

 
The differential end yoke / pinion yoke transfers the power from the driveshaft to the pinion through a u-joint at the end of the driveshaft. This allows the driveshaft to spin while the rear differential travels up and down with the suspension. 

 


t

*

 


U-Joint Series: RPL 20
Style: Wing
Cap Measurement:
- Bolt Hole Center Line to Center Line
2.81 Inch
U-Joint Width:
- Bearing Hole to Hole
5.30 Inch
End Yoke Length(C) :
- Center Line to End of Spline
5.090 Inch
Hub Diameter (D): 3.750 Inch
Spline Diameter (E):
- From Farthest Point to Farthest Point
2.750 Inch
Number of Splines (F): 10
Bore Length (G): 3.000 Inch
VMRS: 024001003


How to Measure a Driveshaft Slip Yoke.


Applications

 

****


This part is compatible with: 
Neapco 6-0020 U-Joint

Alternate Part Options:
Spicer 35-20WYS442A End Yoke
Meritor 20WYS44 2A End Yoke

For assistance measuring your end yoke/pinion yoke you can use our:
End Yoke Measuring Guide

If you have any questions we are here to help:  CHAT | CONTACT US | (574)287-9650

Sku: N20WYS44-2A
Vendor: Neapco
$616.76
Maximum quantity available reached.

DETAILS

.

Related Products