Two Piece Driveshaft Measuring Flange to End Yoke

Information

Two Piece Driveshaft Measuring Guide
Flange to End Yoke

IMPORTANT:
Vehicle must be on a level surface with suspension at normal ride height for proper measurements. When measuring to the center bearing, measure to the center of the round or slotted carrier bearing bolt holes. Many carrier mounts are slotted for adjustment.

DRIVESHAFT LENGTH:

Measurement (A) - Front Driveshaft Length:
Measure from the transmission output flange face to the center of the carrier bearing bolt holes.

Measurement (B) - Rear Driveshaft Length:
Measure from the center of carrier bearing bolt holes to the flats (center of ujoint) on the end yoke at the differential.