Action Machine Inc. is a distributor of high quality transmission slip yokes.
To quickly find your slip yoke, use the filters below for transmission model, spline count and more. Keep in mind when searching based on transmission model that some transmissions have several different output shaft spline counts, like the GM T5 27 spline and Ford T5 28 spline yoke. Always verify your output spline count.
Free Shipping on all orders over $100.00 within the USA.
If you do not see the transmission slip yoke that you are looking for please contact us for assistance.
Hours: Monday - Friday, 7:00 am to 4:30 pm EST
(574) 287-9650 | E-mail
Transmission Slip Yoke
Dodge 30 Spline 7290 Series
Transmission Slip Yoke | 2903-30
Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions including TorqueFlite 727, A833 long tail, A518, 45RFE, 46RH, 46RE, 47RH, 47RE, 545RFE, and 65RFE.
- 7290 Series
- Spline Count: 30
- Inside Snap Ring
-
1.126"
Cap X
2.625" Span - Length: 8.031" (CL to End)
- Manufacturer: PTI
- 7290 Series
- Spline Count: 30
- Inside Snap Ring
- 1.126" Cap X 2.625" Span
- Length: 8.031" (CL to End)
- Bolt Circle: 2.625"
- Manufacturer: PTI
Dodge 30 Spline 7260 Series
Transmission Slip Yoke | 2603-30
Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions including TorqueFlite 727, A833 long tail, A518, 45RFE, 46RH, 46RE, 47RH, 47RE, 545RFE, and 65RFE.
- 7260 Series
- Spline Count: 30
- Inside Snap Ring
-
1.078"
Cap X
2.125" Span - Length: 8.031" (CL to End)
- Manufacturer: PTI
- 7260 Series
- Spline Count: 30
- Inside Snap Ring
- 1.078" Cap X 2.125" Span
- Length: 8.031" (CL to End)
- Bolt Circle: 2.125"
- Manufacturer: PTI
Dodge 26 Spline 7260 Series
Transmission Slip Yoke | 2603-26
Transmission Applications: Fits various 26 spline transmission output shafts for early Dodge cars as well as GM and Dodge trucks including 904, A833 short tail, A500, 42RH, 42RE and AX15. Also fits some Mitsubishi models.
- 7260 Series
- Spline Count: 26
- Inside Snap Ring
-
1.078"
Cap X
2.125" Span - Length: 6.875" (CL to End)
- Manufacturer: PTI
- 7260 Series
- Spline Count: 26
- Inside Snap Ring
- 1.078" Cap X 2.125" Span
- Length: 6.875" (CL to End)
- Bolt Circle: 2.125"
- Manufacturer: PTI
Dodge 30 Spline 1350 Series
Transmission Slip Yoke | 3-3-02231X
Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions including TorqueFlite 727, A833 long tail, A518, 45RFE, 46RH, 46RE, 47RH, 47RE, 545RFE, and 65RFE. Fits Doug Nash, Dodge Viper and SRT10 with the small 1.680" seal.
- 1350 Series
- Spline Count: 29/30
- Outside Snap Ring
-
1.188"
Cap X
3.625" U-Joint Span - Length: 7.779" (CL to End)
- Manufacturer: Spicer/Dana
- 1350 Series
- Spline Count: 29/30
- Outside Snap Ring
- 1.188" Cap X 3.625" U-Joint Span
- Length: 7.779" (CL to End)
- Bolt Circle: 3.625" U-Joint
- Manufacturer: Spicer/Dana
GM 27 Spline 1310 Series
Transmission Slip Yoke | 2-3-6081X
Transmission Applications: Fits various manual and automatic transmission with 27 spline output shafts including Turbo 350 (TH-350), Powerglide, T375, 700R4 (same as TH700R4 or 700R), 200R, 4L60, 4L60E, and 4L65, Borg Warner T-5, T-10, T-56 and Muncie M20 and M21, M22, Tremec , Auto Gear, Saginaw, M-6 and other GM 27 spline output shaft transmissions.
- 1310 Series
- Spline Count: 27
- Outside Snap Ring
-
1.062"
Cap X
3.466" Span - Length: 5.469" (CL to End)
- Manufacturer: Spicer/Dana
- 1310 Series
- Spline Count: 27
- Outside Snap Ring
- 1.062" Cap X 3.466" Span
- Length: 5.469" (CL to End)
- Bolt Circle: 3.466"
- Manufacturer: Spicer/Dana
GM 32 Spline 1410/1415 Series
Transfer Case Slip Yoke | 40021530
Transmission Slip Yoke Can be used on long tail-shaft housing transmissions but most commonly used as a transfer case yoke. LD= Light Duty, Nickel plated.
GM 27 Spline 1330 Series
Transmission Slip Yoke | 2-3-12051X
Transmission Applications: Fits all 27 spline output shafts for GM 700R4 (same as TH700R4 or 700R) , 4L60, 4L60E, 4L65 transmissions. Also fits Turbo 350 (TH-350), Powerglide, T375, 200R, 4L65, Borg Warner T-5, T-10, T-56 and Muncie M20 and M21, M22, Tremec , Auto Gear, Saginaw, M-6 and other GM 27 spline output shaft transmissions, but verify barrel length compatibility on these before purchase.
- 1330 Series
- Spline Count: 27
- Outside Snap Ring
-
1.062"
Cap X
3.875" Span - Length: 6.760" (CL to End)
- Manufacturer: Spicer/Dana
- 1330 Series
- Spline Count: 27
- Outside Snap Ring
- 1.062" Cap X 3.875" Span
- Length: 6.760" (CL to End)
- Bolt Circle: 3.875"
- Manufacturer: Spicer/Dana
Ford 31 Spline 1350 Series
Transfer Case Slip Yoke | N3-3-5431X
Transmission Slip Yoke This yoke is often found on F-150, F-250, F-350, Bronco with Borg Warner 31 spline output shaft.
GM 27 Spline 1350 Series
Transmission Slip Yoke | N3-3-4271X
Transmission Applications: All manual and automatic transmission with 27 spline output shafts including Turbo 350 (TH-350), Powerglide, T375, 700R4, 200R, 4L60, 4L60E, and 4L65, Borg Warner T-5, T-10, T-56 and Muncie M20 and M21, M22, Tremec , Auto Gear, Saginaw, M-6 and other GM 27 spline output shaft transmissions.
- 1350 Series
- Spline Count: 27
- Outside Snap Ring
-
1.187"
Cap X
3.625" Span - Length: 5.94" (CL to End)
- Manufacturer: Neapco
- 1350 Series
- Spline Count: 27
- Outside Snap Ring
- 1.187" Cap X 3.625" Span
- Length: 5.94" (CL to End)
- Bolt Circle: 3.625"
- Manufacturer: Neapco
Dodge 30 Spline 1350 Series
Transmission Slip Yoke | 3-3-3931X
Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions including TorqueFlite 727, A833 long tail, A518, 45RFE, 46RH, 46RE, 47RH, 47RE, 545RFE, and 65RFE. Fits Doug Nash, Dodge Viper and SRT10 with the small 1.680" seal.
- 1350 Series
- Spline Count: 30
- Outside Snap Ring
-
1.188"
Cap X
3.625" U-Joint Span - Length: 6.630" (CL to End)
- Manufacturer: Spicer/Dana
- 1350 Series
- Spline Count: 30
- Outside Snap Ring
- 1.188" Cap X 3.625" U-Joint Span
- Length: 6.630" (CL to End)
- Bolt Circle: 3.625" U-Joint
- Manufacturer: Spicer/Dana
GM 32 Spline 1350 Series
Transfer Case Slip Yoke | 3-3-5551X
Transmission Slip YokeSKU: 3-3-5551XSpicer Slip Yoke for GM vehicles with 1350 Series U Joints, 32 spline and matching measurement specs. See Slip Yoke Measurement Guide for complete part dimensions. Can be used on long...
Dodge 30 Spline 1330 Series
Transmission Slip Yoke | 2-3-14031X
Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions including TorqueFlite 727, A833 long tail, A518, 45RFE, 46RH, 46RE, 47RH, 47RE, 545RFE, and 65RFE. Fits Doug Nash, Dodge Viper and SRT10 with the small 1.680" seal.
- 1330 Series
- Spline Count: 29/30
- Outside Snap Ring
-
1.062"
Cap X
3.625" Span - Length: 8.030" (CL to End)
- Manufacturer: Spicer/Dana
- 1330 Series
- Spline Count: 29/30
- Outside Snap Ring
- 1.062" Cap X 3.625" Span
- Length: 8.030" (CL to End)
- Bolt Circle: 3.625"
- Manufacturer: Spicer/Dana
