Free Ground Shipping on ALL Driveshafts and Orders Over $100 within the Continental USA! 

{"id":8226145989,"title":"Custom Driveshaft - Steel, 3.5\" OD, 1310 Series","handle":"3-5s1310","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eCustom Driveshaft - Steel, 3.5\" OD, 1310 Series\u003c\/h3\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eFREE GROUND SHIPPING INSIDE THE USA\u003cbr\u003e(This product does not qualify for international shipping) \u003c\/h3\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeld Yoke Material\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003eForged Steel\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Material\u003c\/td\u003e\n\u003ctd\u003e3.5\" OD X .083 Wall DOM Seamless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Outside Diameter\u003c\/td\u003e\n\u003ctd\u003e3.5\" OD  \u003ca href=\"https:\/\/actionmachineinc.myshopify.com\/pages\/tube-diameter-reference-page\" target=\"_blank\" title=\"Measuring Guide Tube Diameter\" rel=\"noopener noreferrer\"\u003e(Measuring Guide - Tube OD)\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003eU-Joint\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSpicer\/Dana\u003cbr\u003e1310 Series\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/actionmachineinc.myshopify.com\/pages\/finding-u-joint-series\" title=\"U-Joint Measuring Guide \" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(Measuring Guide - U-Joint)\u003cbr\u003e\u003c\/a\u003e\u003cspan\u003eU-Joint Size: 1 1\/16\" Cap x 3\u003c\/span\u003e\u003cspan\u003e 7\/32\u003c\/span\u003e\u003cspan\u003e\" Span\u003cbr\u003e\u003c\/span\u003ePremium Non-Greasable\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMax Length \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd title=\"Over all driveshaft measurements to be taken from the center of u-joint on one end to the center of u-joint on the opposite end.\"\u003e64 inches - Center to Center of U-Joint\u003cbr\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003ca href=\"\/pages\/driveshaft-measuring-guide-form-1-piece\" title=\"Driveshaft Length Measuring Guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(Measuring Guide - Driveshaft Length)\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eQuality Steel Driveshaft\u003c\/span\u003e\u003c\/h3\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eAll of our steel driveshafts are made from the finest driveline quality tubing which makes our driveshaft stronger and straighter from the start compared to regular cold rolled tubing.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSteel is our most popular material choice due to its versatility, high strength and economical price. \u003c\/span\u003eDriveshafts are checked in special computer software to ensure that shaft design, dimensions, and critical speeds will suit your application. Our shafts are high speed balanced on the latest driveline manufacturing equipment with balance weight allowances far less than OEM specs.\u003c\/p\u003e\n\u003cdiv class=\"col-xs-6\"\u003e\n\u003cli\u003e\u003cstrong\u003eQuality Steel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePrecision Balancing\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePremium Spicer U-Joints\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-6\"\u003e\n\u003cli\u003e\u003cstrong\u003eVariable Length Options\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLifetime Warranty on our Welds\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFast Turn Around Time\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003c\/h4\u003e","published_at":"2017-09-19T12:48:32-04:00","created_at":"2017-06-21T10:37:24-04:00","vendor":"Action Machine INC","type":"Custom Driveshaft","tags":["3.5S1310","Material_Steel","Tube Outside Diameter_3.5\" OD","U-Joint Series_1310","U-Joint Size_1 1\/16\" Cap x 3 7\/32\" Span"],"price":28531,"price_min":28531,"price_max":28531,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39836656133,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3.5S1310","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Custom Driveshaft - Steel, 3.5\" OD, 1310 Series","public_title":null,"options":["Default Title"],"price":28531,"weight":9979,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/products\/driveshaft.sm.jpg?v=1548707146","\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/products\/u-joint.weld.sm.jpg?v=1548707146","\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/products\/weld2.sm.jpg?v=1548707146","\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/products\/sticker.sm.jpg?v=1548707146"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/products\/driveshaft.sm.jpg?v=1548707146","options":["Title"],"content":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eCustom Driveshaft - Steel, 3.5\" OD, 1310 Series\u003c\/h3\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003eFREE GROUND SHIPPING INSIDE THE USA\u003cbr\u003e(This product does not qualify for international shipping) \u003c\/h3\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeld Yoke Material\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003eForged Steel\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Material\u003c\/td\u003e\n\u003ctd\u003e3.5\" OD X .083 Wall DOM Seamless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Outside Diameter\u003c\/td\u003e\n\u003ctd\u003e3.5\" OD  \u003ca href=\"https:\/\/actionmachineinc.myshopify.com\/pages\/tube-diameter-reference-page\" target=\"_blank\" title=\"Measuring Guide Tube Diameter\" rel=\"noopener noreferrer\"\u003e(Measuring Guide - Tube OD)\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003eU-Joint\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSpicer\/Dana\u003cbr\u003e1310 Series\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/actionmachineinc.myshopify.com\/pages\/finding-u-joint-series\" title=\"U-Joint Measuring Guide \" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(Measuring Guide - U-Joint)\u003cbr\u003e\u003c\/a\u003e\u003cspan\u003eU-Joint Size: 1 1\/16\" Cap x 3\u003c\/span\u003e\u003cspan\u003e 7\/32\u003c\/span\u003e\u003cspan\u003e\" Span\u003cbr\u003e\u003c\/span\u003ePremium Non-Greasable\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMax Length \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd title=\"Over all driveshaft measurements to be taken from the center of u-joint on one end to the center of u-joint on the opposite end.\"\u003e64 inches - Center to Center of U-Joint\u003cbr\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003ca href=\"\/pages\/driveshaft-measuring-guide-form-1-piece\" title=\"Driveshaft Length Measuring Guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(Measuring Guide - Driveshaft Length)\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eQuality Steel Driveshaft\u003c\/span\u003e\u003c\/h3\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eAll of our steel driveshafts are made from the finest driveline quality tubing which makes our driveshaft stronger and straighter from the start compared to regular cold rolled tubing.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSteel is our most popular material choice due to its versatility, high strength and economical price. \u003c\/span\u003eDriveshafts are checked in special computer software to ensure that shaft design, dimensions, and critical speeds will suit your application. Our shafts are high speed balanced on the latest driveline manufacturing equipment with balance weight allowances far less than OEM specs.\u003c\/p\u003e\n\u003cdiv class=\"col-xs-6\"\u003e\n\u003cli\u003e\u003cstrong\u003eQuality Steel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePrecision Balancing\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePremium Spicer U-Joints\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-6\"\u003e\n\u003cli\u003e\u003cstrong\u003eVariable Length Options\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLifetime Warranty on our Welds\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFast Turn Around Time\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003c\/h4\u003e"}
  1. Home
  2. Step 1: Choose Your Driveshaft
  3. Custom Driveshaft - Steel, 3.5" OD, 1310 Series

Custom Driveshaft - Steel, 3.5" OD, 1310 Series

Previous Product | Next Product
Product Description

Custom Driveshaft - Steel, 3.5" OD, 1310 Series

FREE GROUND SHIPPING INSIDE THE USA
(This product does not qualify for international shipping) 

Weld Yoke Material
Forged Steel
Tube Material 3.5" OD X .083 Wall DOM Seamless
Tube Outside Diameter 3.5" OD  (Measuring Guide - Tube OD)
U-Joint

Spicer/Dana
1310 Series (Measuring Guide - U-Joint)
U-Joint Size: 1 1/16" Cap x 3 7/32" Span
Premium Non-Greasable
Max Length  64 inches - Center to Center of U-Joint
(Measuring Guide - Driveshaft Length)

 

Quality Steel Driveshaft

All of our steel driveshafts are made from the finest driveline quality tubing which makes our driveshaft stronger and straighter from the start compared to regular cold rolled tubing. Steel is our most popular material choice due to its versatility, high strength and economical price. Driveshafts are checked in special computer software to ensure that shaft design, dimensions, and critical speeds will suit your application. Our shafts are high speed balanced on the latest driveline manufacturing equipment with balance weight allowances far less than OEM specs.

  • Quality Steel
  • Precision Balancing
  • Premium Spicer U-Joints
  • Variable Length Options
  • Lifetime Warranty on our Welds
  • Fast Turn Around Time

    •  

     

    Sku: 3.5S1310
    $285.31
    Maximum quantity available reached.
    Next
    ⤎ Back
    Review All Driveshafts.
    Next ⤏
    Choose Your Slip Yoke.

    How to Place a Custom Driveshaft Order

    Add your Driveshaft and critical parts to the cart:

    • Driveshaft
    • End Yoke
    • Slip Yoke

    Place your order, and check out.

    Respond to follow up E-mail with overall driveshaft dimensions. 

    Use this guide to measure driveshaft length for most cars, vans, 2WD trucks, and some 4WD front and rear shafts.

    Measure Instructions: It is important to measure the driveshaft length when the vehicle’s axle is in the normal riding position. The axle must be supported on safety stands - not hanging down. 

     

    Driveshaft Measuring Guide

     Transmission Output Type -
    SEAL

    Measurement (A) - DRIVESHAFT LENGTH:
    Measure from end of rubber seal on the transmission to the flat face of the end yoke or flange on the differential.

    Measurement (B) - SPLINE EXTRUSION LENGTH:
    Measure from end of rubber seal to end the of the transmission output. If spline is recessed in rubber seal, measurement can be noted as ø.

     Transmission Output Type - 
    RUBBER BOOT EXTENSION

    Measurement (A) - DRIVESHAFT LENGTH:
    Measure from end of rubber boot extension on the transmission to the flat face of the end yoke or flange on the differential.

    Measurement (B) - SPLINE EXTRUSION LENGTH:
    Measure from end of rubber boot extension on the end of transmission output. If spline is recessed in rubber boot extension, enter ø.



     

     Other Measuring Guides

     

     

    U-Joint Identifier 

    Choose the style of U-Joint that you are looking for?

     

    Related Products